Job evaluation: methods of job evaluation – simple routing target systems – classification method – factor comparison method – point method – merits and limitations of job evaluation. Suspension System: Objects of suspension systems – rigid axle suspension system, torsion bar, shock absorber, independent suspension system.
TECH. AERONAUTICAL ENGINEERING INTRODUCTION TO SPACE TECHNOLOGY
TECH. AERONAUTICAL ENGINEERING INTRODUCTION TO AEROSPACE ENGINEERING
TECH. AERONAUTICAL ENGINEERING AIR TRANSPORTATION SYSTEMS
TECH. AERONAUTICAL ENGINEERING ROCKETS AND MISSILES
TECH. AUTOMOBILE ENGINEERING DISASTER MANAGEMENT
Organizational Structure of Disaster Management in India - Preparation of State and District Disaster Management Plans. National Disaster Management Plan, Ministry of Home Affairs, Government of India (http://www.ndma.gov.in/images/policyplan/dmplan/draftndmp.pdf).
TECH. AUTOMOBILE ENGINEERING INTELLECTUAL PROPERTY RIGHTS
TECH. AUTOMOBILE ENGINEERING DATA STRUCTURES
Fundamentals of Data structures in C, 2nd Edition, E. Horowitz, S. Sahni and Susan Anderson-Freed, Universities Press. Data Structures and Algorithms made easy in JAVA, 2nd Edition, Narsimha Karumanchi and Career Monk Publications.
TECH. AUTOMOBILE ENGINEERING ARTIFICIAL NEURAL NETWORKS
Self-Organizing Maps (SOM): Two Basic Feature Map Models, Self-Organizing Map, SOM Algorithm, Feature Map Properties, Computer Simulations, Learning Vector Quantization, Adaptive Pattern Classification.
TECH. AUTOMOBILE ENGINEERING INTRODUCTION TO MECHATRONICS
Electromechanical drives: relays and solenoids - stepper motors - DC brush motors - DC brushless motors - DC servo motors - 4-quadrant servo drives, PWM - pulse width modulation - variable frequency drives, vector drives - drive system load calculation. Programmable Logic Controllers: Basic Structure - Programming: Ladder Diagram - Timers, Internal Relays and Counters - Shift Registers - Master and Skip Controllers - Data Handling - Analog Input/Output - PLC Selection - Application.
TECH. AUTOMOBILE ENGINEERING MICROPROCESSORS AND MICROCONTROLLERS
Advanced ARM processors: Introduction to CORTEX processor and its architecture, OMAP processor and its architecture.
TECH. BIOMEDICAL ENGINEERING RELIABILITY ENGINEERING
Network Reliability Evaluation Using Probability Distributions: Reliability Evaluation of Series, Parallel Systems – Partially Redundant Systems – Determination of Reliability Metric – MTTF for Series and Parallel Systems – Examples. Approximate system reliability evaluation: Series systems – Parallel systems- Network reduction techniques- Cut set approach- Common mode fault modeling and evaluation techniques- Examples.
TECH. BIOMEDICAL ENGINEERING MEDICAL ELECTRONICS
TECH. BIOMEDICAL ENGINEERING TELEMETRY AND TELECONTROL
Remote Control Methods and Applications of Telemetry and Remote Control - Swoboda G., Reinhold Publishing Corp., London, 1991.
TECH. BIOMEDICAL ENGINEERING
EMI Measurements: Introduction to Outdoor Test Site Measurements - Measurement Precautions - Open Area Test Site - Terrain Roughness - NSA - Test Site Imperfection Measurement - Antenna Factor Measurement - Measurement Errors. Radiated Interference Measurements – Echo Chamber – TEM Cell – Echo Chamber – Ghz TEM Cell – Comparison of Test Objects – Measurement Uncertainties Conducted Interference Measurements – Characterization – Conducted EM Noise on Power Lines – Conducted EMI from Equipment – Impedance – Detectors and Measurements – Impulse Immunity to EMI - Electrostatic Discharge.
TECH. CIVIL ENGINEERING DISASTER MANAGEMENT
TECH. CIVIL ENGINEERING REMOTE SENSING AND GIS
Raster Data Model: Elements of Raster Data Model, Raster Data Types, Raster Data Structure, Data Conversion, Raster and Vector Data Integration. Data entry: Metadata, Conversion of existing data, creation of new data; Remote Sensing Data, Field Data, Text Data, Digitization, Scanning, Screen Digitization, Significance of Source Map, Data Editing.
TECH CIVIL ENGINEERING GEOINFORMATICS
TECH. CIVIL ENGINEERING INTELLECTUAL PROPERTY RIGHTS
TECH CIVIL ENGINEERING
The Environmental Protection Act, the Water Act, the Air Act (Pollution Prevention and Control Act), Motor Act, Wildlife Act.
TECH. CIVIL ENGINEERING
Course Outcome: It enables students to learn the basics of entrepreneurship and entrepreneurial development, which will help them provide a vision for their own start-up. Strategic Growth in Entrepreneurship, The Valuation Challenge in Entrepreneurship, The Latest Crop of New Ventures, Technology, Business Incubation, India Way - Entrepreneurship; Women Entrepreneurs - Strategies to Develop Women Entrepreneurs, Institutions that Support Women Entrepreneurship in India.
TECH. CIVIL AND ENVIRONMENTAL ENGINEERING DISASTER MANAGEMENT
TECH. CIVIL AND ENVIRONMENTAL ENGINEERING ENVIRONMENTAL IMPACT ASSESSMENT
TECH. CIVIL AND ENVIRONMENTAL ENGINEERING INTELLECTUAL PROPERTY RIGHTS
Remote Sensing: Basic concept of remote sensing, data and information, collection of remote sensing data, advantages and limitations of remote sensing, remote sensing process. Electromagnetic spectrum, energy interactions with atmosphere and land surface features (soil, water, vegetation), characteristics of Indian satellites and sensors, resolution, map and image and false color composite, introduction to digital data, elements of visual interpretation techniques.
TECH. CIVIL AND ENVIRONMENTAL ENGINEERING ENTREPRENEURSHIP AND SMALL BUSINESS ENTERPRISES
TECH COMPUTER SCIENCE AND ENGINEERING/TECH INFORMATION TECHNOLOGY
Relational Model: Introduction to the Relational Model, Relationship Integrity Constraints, Enforcing Integrity Constraints, Relational Data Query, Logical Database Design: ER to Relational, Introduction to Views, Destroying/Modifying Tables and Views. Collection Framework in Java - Introduction to Java Collections, Overview of Java Collection Framework, Generics, Commonly Used Collection Classes - Array List, Vector, Hash Table, Stack, Enumeration, Iterator, String Tokenizer, Random, Scanner, Calendar and Properties.
TECH COMPUTER SCIENCE AND ENGINEERING / TECH INFORMATION TECHNOLOGY
UNIT IV
TECH. ELECTRONICS AND COMMUNICATION ENGINEERING / TECH ELECTRONICS AND TELEMATICS ENGINEERING
ELECTRONICS AND COMMUNICATIONS ENGINEERING / B.TECH ELECTRONICS AND TELEMATICS ENGINEERING / B.TECH ELECTRONICS AND TELEMATICS ENGINEERING PRINCIPLES OF COMPUTER COMMUNICATIONS AND NETWORKING. Overview of Computer Communications and Networks: Introduction to Computer Communications and Networks, Introduction to Computer Networks, Types of Computer Networks, Network Addressing, Routing, Reliability, Interoperability and Security, Network Standards, the Telephone System, and Data Communications.
TECH. ELECTRONICS AND COMPUTER ENGINEERING SCRIPTING LANGUAGES
Tcl Fundamentals, String and Pattern Matching, Tcl Data Structures, Control Flow Commands, Procedures and Scope, Evel, Working with Unix, Reflection and Debugging, Script Libraries, Tk Fundamentals, Tk by examples, The Pack Geometry Manager, Binding Commands to X Events , Buttons and Menus, Simple Tk Widgets, Entry and List box Widgets Focus, Grab and Dialogs. Introduction to Python, using the Python interpreter, several control flow tools, data structures, modules, input and output, errors and exceptions, classes, brief tour of the standard library.
TECH. ELECTRONICS AND COMPUTER ENGINEERING SOFT COMPUTING TECHNIQUES
Basic concepts of genetic algorithms (GA), biological background, generation of offspring, working principle, coding, fitness function, reproduction, inheritance operators, crossover, inversion and deletion, mutation operator, bitwise operators used in GA, Generative Cycle, Genetic Algorithm Convergence. Types of Hybrid Systems, Neural Networks, Fuzzy Logic and Hybrid Genetic Algorithms, BPN Based Genetic Algorithm: GA Based Weight Determination, Department of Fuzzy Back Propagation.
TECH. ELECTRONICS AND COMPUTER ENGINEERING DATA ANALYTICS
Frequent Itemsets and Clustering: Mining Frequent Itemsets – Market-Based Modeling – Apriori Algorithm – Handling Large Datasets in Main Memory – Limited Pass Algorithm – Counting Frequent Itemsets in a Stream – Clustering Techniques – Hierarchical – K-Means – Clustering of High-Dimensional Data – CLICK and ProCLUS - Frequent pattern-based clustering methods - Clustering in non-Euclidean space - Clustering for streams and Parallelism.
TECH ELECTRICAL AND ELECTRONICS ENGINEERING NON-CONVENTIONAL POWER GENERATION
Geothermal Energy - Sources- Hydrothermal Convective - Geopressure Resources - Petrothermal Systems (HDR) - Magma Resources-Prime Movers. OTEC Systems- Principle of Operation - Open and Closed Circuits, Energy from Tidal - Principle of Tidal Power - Components of Tidal Power Plants - Methods of Operation - Estimation of Energy in Single and Double Basin Systems - Energy and Power from Waves - Wave Energy Conversion Devices - Fuel Cells - Design and Principle of Operation - Types of Fuel Cells - Advantages and Disadvantages - Types of Electrodes - Applications - Basics of Batteries - Construction Details of Lead Acid Batteries - Ni-Cd Batteries.
TECH ELECTRICAL AND ELECTRONICS ENGINEERING ELECTRICAL ENGINEERING MATERIALS
TECH. ELECTRICAL AND ELECTRONICS ENGINEERING NANOTECHNOLOGY
ELECTRICAL ENGINEERING AND ELECTRONICS NANOTECHNOLOGY. STM), field ion microscope (FEM), three-dimensional atom probe (3DAP), nanoindentation. Application of nanomaterials: Nanoelectronics, Micro- and Nano-electromechanical systems (MEMS/NEMS), Nanosensors, Nanocatalysts, Food and agricultural industry, Cosmetic and consumer products, Structures and engineering, Automotive industry, Water purification and environment, Nano-medical applications, textiles , colors, energy, defense and space applications, concerns and challenges of nanotechnology.
TECH ELECTRICAL AND ELECTRONICS ENGINEERING DESIGN ESTIMATION AND COSTING OF ELECTRICAL SYSTEMS
Code of Practice for Electrical Wiring Installations (System Voltage Not Exceeding 650 Volts), Indian Standard Institution, IS: 732-1983. Code of Practice for Electrical Wiring, Installations (System Voltage Not Exceeding 650 Volts), Indian Standards Institution, IS: 2274-1963.
TECH ELECTRICAL AND ELECTRONICS ENGINEERING ENERGY STORAGE SYSTEMS
Jim Eyer, Garth Corey”, Energy Storage for the Electric Grid: Benefits and Market Potential Assessment Guide, Report, Sandia National Laboratories, February 2010.
TECH ELECTRICAL AND ELECTRONICS ENGINEERING INTRODUCTION TO MECHATRONICS
Programmable Motion Controllers: Introduction - System Transfer Function - Laplace Transform and its Application in Differential Equation Analysis of a Control System - Feedback Devices: Position, Velocity Sensors - Incremental Optical Encoders - Proximity Sensors: Inductive, capacitive, infrared and infrared process - Control system performance and tuning - Digital controllers - P , PI , PID control - Control modes - Position, speed and torque - Speed profiles - Trapezoidal - S.
TECH ELECTRICAL AND ELECTRONICS ENGINEERING ENTREPRENEUR RESOURCE PLANNING
ERP In Action & Business Modules: Operation & Maintenance – Performance – ERP System Maximization – Business Modules – Finance – Manufacturing – Human Resources – Plant Maintenance – Materials Management – Quality Management – Marketing – Sales, Distribution and Service. Enterprise Application Integration – ERP and E-Business – ERP II – Total Quality Management – Future Directions – Trends in ERP.
TECH ELECTRICAL AND ELECTRONICS ENGINEERING MANAGEMENT INFORMATION SYSTEM (MIS)
Model, Foundations of IS in Business, Obstacles in Adopting IT, ERP Market- ERP Modules: Finance, Accounting Systems, Manufacturing and Production Systems, Sales and Distribution Systems, Personnel Systems, Factory Maintenance System, Material Management System, Quality Management System, ERP System Options and selection, ERP proposal evaluation.
TECH ELECTRICAL AND ELECTRONICS ENGINEERING ORGANIZATIONAL BEHAVIOUR
Teams – The nature of groups – dynamics in informal groups – dysfunctions in groups and teams – teams in a modern workplace. High Performance Management: Job design and goal setting for high performance - Quality of work life - Sociotechnical design and high performance work practices - Behavioral performance management: reinforcement and punishment as principles of learning - The process of behavior change - Management theories - Styles, activities and skills of great leaders.
TECH. ELECTRONICS AND INSTRUMENTATION ENGINEERING ELECTRONIC MEASUREMENTS AND INSTRUMENTATION
Oscilloscopes: CRT, block diagram of CRO, time base circuits, Lissajous figures, CRO probes, high frequency CRO considerations, delay lines, applications: measurement of time, period and frequency specifications. Measurement of physical parameters: flow measurement, displacement meters, liquid level measurement, humidity and moisture measurement, speed, force, pressure – high pressure, vacuum level, temperature measurements, data acquisition systems.
TECH. ELECTRONICS AND INSTRUMENTATION ENGINEERING INDUSTRIAL ELECTRONICS
TECH. ELECTRONICS AND INSTRUMENTATION ENGINEERING SENSORS AND TRANSDUCERS
TECH. ELECTRONICS AND INSTRUMENTATION ENGINEERING PC BASED INSTRUMENTATION
TECH. MECHANICAL ENGINEERING OPTIMIZATION TECHNIQUES
Constrained non-linear programming: Characteristics of a constrained problem - classification - Basic approximation of Penalty function method - Basic approximation of Penalty function method - Basic approximations of Inner and External penalty function methods - Introduction to convex programming problem. Dynamic programming: Dynamic programming multistage decision-making processes – types – concept of suboptimization and the principle of optimality – calculation procedure in dynamic programming – examples illustrating the calculus method of solution – examples illustrating the tabular method of solution.
TECH. MECHANICAL ENGINEERING COMPUTER GRAPHICS
Computer Graphics Second edition”, Zhigand xiang, Roy Plastock, Schaum's outlines, Tata Mc Graw hill edition. Computer Graphics Principles & practice”, anden udgave i C, Foley, Van Dam, Feiner og Hughes, Pearson Education.
TECH. MECHANICAL ENGINEERING INTRODUCTION TO MECHATRONICS
TECH. MECHANICAL ENGINEERING
Couplings, clutches and brakes: construction and applications of couplings (box; flange; . pin type flexible; universal and Oldham), clutches (disc and centrifugal), and brakes (block; shoe; belt and disc). Engineering Materials: Types and applications of ferrous and non-ferrous metals, wood, abrasives, silica, ceramics, glass, graphite, diamond, plastic and polymer.
TECH. MECHANICAL ENGINEERING WORLD CLASS MANUFACTURING
Globalization and World-Class Production: Generic Production Strategies for the Information Age; Planning methodology and issues in strategic planning of WCM;. The Future WCM: Manufacturing Strategy: Futile Search for an Elusive Link, Manufacturing Strategic Intent Classification, Translating Intent into Action.
TECH. MECHANICAL ENGINEERING FUNDAMENTALS OF ROBOTICS
Route planning: Joint space scheme - Cubic polynomial adjustment - Obstacle avoidance while using space-cubic polynomial adjustment with waypoint, run-out scheme.
TECH. MECHANICAL ENGINEERING FABRICATION PROCESSES
Forging Processes: Forging operations and principles – Tools – Forging methods – Smith forging, plunge forging – Roll forging – Forging hammers: Rotary forging – forging defects – cold forging, rolling, forging forces.
TECH. MECHANICAL ENGINEERING TOTAL QUALITY MANAGEMENT
Factories Act – 1948 : Statutory authorities – inspecting personnel, health, safety, provisions relating to hazardous processes, welfare, hours of work, employment of youth – special provisions – penalties and procedure- Telangana Factories Rules 1950 under the Safety and Health chapters of the Factories Act 1948. International Acts and Standards: US Occupational Safety and Health Act (Williams-Steiger Act of 1970) – Health and Safety at Work Act (HASAWA 1974, UK) – OSHAS 18000 – ISO 14000 – American National Standards Institute (ANSI).
TECH. MECHANICAL ENGINEERING BASICS OF THERMODYNAMICS
Atmospheric air - Psychrometric properties - Dry bulb temperature, wet bulb temperature, dew point temperature, , specific humidity, relative humidity, saturated air, vapor pressure, degree of saturation - adiabatic saturation, psychrometric chart.
TECH. MECHANICAL ENGINEERING RELIABILITY ENGINEERING
Discrete Markov Chains: Basic Concepts - Stochastic Transition Probability Matrix - Time-dependent Probability Evaluation - Probability State Evaluation - Absorbing States - Examples. Continuous Markov processes: modeling concepts - State space diagrams - Evaluation of the unreliability of one- and two-component repairable systems.
TECH. MECHANICAL ENGINEERING (MATERIAL SCIENCE AND NANOTECHNOLOGY)
- Ray Diffraction and Spectroscopic methods
Course overview: The aim is to introduce students to the overview of the non-destructive testing methods of materials. The aim is to introduce students to the overview of the properties of materials used in the engineering manufacturing process.
TECH. MECHANICAL ENGINEERING (MECHATRONICS) ANALOG AND DIGITAL IC APPLICATIONS
TECH. MECHANICAL ENGINEERING (MECHATRONICS) INTELLECTUAL PROPERTY RIGHTS
TECH. MECHANICAL ENGINEERING (MECHATRONICS) COMPUTER ORGANIZATION
Assembly Language Programming with 8086- Machine level programs, Machine coding of the programs, Programming with an assembler, Assembly Language example programs. Stack structure of 8086, Interrupts and Interrupt service routines, Interrupt cycle of 8086, Interrupt programming, Passing parameters to procedures, Macros, Timings and Delays.
TECH. MECHANICAL ENGINEERING (MECHATRONICS) DATA STRUCTURES
