Page 89 of 104
b. For liquid based bio-pesticide Filling Heads : Four Heads
Operating System : Induction Motor With Cam System Output/ Min : 2-30Bottles /Hr of 500- 1000 ml Bottle Power Characteristics : 1 HP 440v 3 Phase 50Hz 3 Wire System
Air : N/A
Input (Container Dia/Height): 24mm Dia to 56mm Dia/ Height 120mm Max.
Filling System : Piston filling with Mechanical valve Fill Range : 500 ml to 1000 ml with Cam Follower Mechanism Filling Accuracy : ± 0.5 to 1% Filling accuracy on single dose Tank Storage Capacity : N/A
Machine Construction : Stainless steel SS 304
Skid mounted Fully Automated Bottle Filling/ Sealing/Capping Machine system for aseptically filling Fermented Sterile Broth.
Liquid : Harvested Liquid Broth from Fermentor/ Bioreactor Liquid Volume : 250 Lits/ batch
Filling Time : 6 hrs/day.
Bottle Liquid fill size: 500 - 1000 ml
Bottle filling will be done under LAF with a view to maintain aseptic condition.
The machine must comply with ISO 3690/CE/GMP certification 52. Double Cone
Blender (Bio-pesticide carrier mixing unit) (Tender Fee: Rs.
1,500.00)
Automatic Mixing Machine - Double shaft Storage Capacity – 25 kg
Working storage – 25 kg Geared Motor – 1HP MOC – SS
Shaft size – 25 mm
0.05
SURGERY AND RADIOLOGY DEPARTMENT, COLLEGE OF VS & AH, AAU, ANAND 53. Endotracheal Tubes
for Large Animals (Total Five)
(Tender Fee: Rs.
1,500.00)
Size 16 mm i.d. x 1 Size 18 mm i.d. x 1 Size 20 mm i.d. x 1 Size 22 mm i.d. x 1 Size 24 mm i.d. x 1
0.03
Page 90 of 104
MAIN RICE RESEARCH STATION, AAU, NAWAGAM 55. Combine Harvester
(Tender Fee: Rs.
1,500.00)
We intend to buy combine harvester for our rice research station.
The combine harvester quoted should meet below mentioned specifications as below:
1. Speed Adjustment: Preferably mechanically
2. Height Adjustment: The height should be hydraulically adjusted.
3. Cleaning: The cleaning should ideally be forced air type with mechanical adjustment.
4. Transmission: The transmission should ideally be fully hydro statically controlled independently by two levers.
5. Cutter Bar Width – 2400 mm to 4400 mm 6. Min. Cutting Height- Thresher Drum 7. Cleaning Area- 15000 to 20000 sq. cm.
8. Length- 7000 to 8000 mm 9. Width- 3000 to 4000 mm
10. Hydraulic Oil Tank- 25 Ltr. (minimum) 11. No of Blades- 6 (minimum)
12. Width of Fan- 800 to 900 mm
13. Min Ground Clearance- 400 to 500 mm 14. Steering System- Hydraulic
15. No of Cylinders- 4 – 6 16. Engine Type- Ashok Leyland
17. Engine BHP Maximum- 76 PS 2200 RPM 18. Cutter Bar Height Adjustment- Hydraulically 19. Cutter Bar Cutting Height - 100 mm (minimum) 20. Reel Type- Pick Up
21. Reel Speed Adjustment- Mechanically
22. Speed of transmission: The speed should be 0-10 km /hr or better.
Note:
1. Training is to be given onsite.
2. Warranty of implement will start only after the installation of the implement.
3. All the above information for Combine harvester should be clearly mentioned on instrument brochure from the manufacturing company is to be attached.
4. Any peripherals/ spares other than above mentioned required for the warranty service system for working of implement should be supplied along with the system.
5. A certificate from the original instrument manufacturer company will be required confirming about the availability of all essential spares / parts for at least 05 years after the expiry of one year standard warranty period.
6. The bidder may also visit the Department before submitting the instrument quote. No modification or requirement will be provided for the system at the time of installation by the Department. If there is a need of any utilities during the installation of implement, then the requirement has to be fulfilled / supplied by the bidder.
7. Should provide at least one year warranty certificate.
8. Should provide authorization certificate, instrument installation, demonstration and time to time service as and when necessary.
9. Must include all the cost like installation charges, taxes, on site delivery and other charges, if any.
0.60
Page 91 of 104 56. Paddy Thresher
(Tender Fee: Rs.
1,500.00)
Tractor operated paddy thresher with towing hook and pneumatic wheels.
1. Overall dimension- Length 3500 to 4000 mm and width 2500 to 3000 mm
2. Drum PTO shaft to main drum shaft through graved and V-belt.
3. Drum dimensions- 700 to 900 mm, length: 600 to 800 mm 4. Blower: Fan type
5. Blow straw: Centrifugal type fan with 6 bladeS
6. With different type of sieves for grading and cleaning of paddy.
7. Any peripherals / spares other than above mentioned required for the system for working should be supplied along with the system
8. Warranty of instrument will start only after the installation of the instrument and not after supply / delivery of instrument.
Note:
1. Warranty of instrument will start only after the installation of the instrument.
2. All the above information for Tractor operated paddy thresher should be clearly mentioned on instrument brochure and from the manufacturing company is to be attached.
3. Any peripherals / spares other than above mentioned required for the system for working of implement should be supplied along with the system.
4. Should provide at least one year warranty certificate.
5. Should provide authorization certificate, instrument installation, demonstration and time to time service as and when necessary.
6. Must include all the cost like installation charges, taxes, on site delivery and other charges, if any.
0.06
57. Laser Land Leveler (Tender Fee: Rs.
1,500.00)
Laser guided land leveler is used for precise levelling of fields with desired grade
1. Type-Tractor operated, fully automatic 2. Operating range - Dia. 600 meter (min.) 3. Laser beam type - Red visible
4. Operating power - 12 vdc through external socket 5. Power source - External alkaline battery <50 h backup BLADE CONTROL LASER RECEIVER
6. Beam reception range-3600
7. Vertical reception range -190 mm (min.) 8. It should have automatic control capability CONTROL PANEL
9. It should have automatic control 10. It should have out beam indicator 11. Power-12 vdc through cable
12. Hydraulic operating setting-Directional or proportional value 13. LED display-Show up grade, on grade and below grade
position of the laser receiver BUCKET SCRAPER
14. Tyre-Double
15. Length-2000 mm (minimum) 16. Width-580 mm (minimum) 17. Thickness-8-9 mm (minimum)
0.15
Page 92 of 104 Note:
1. Training is to be given onsite.
2. Warranty of implement will start only after the installation of the implement.
3. All the above information for Laser Land Leveler should be clearly mentioned on instrument brochure from the manufacturing company is to be attached.
4. Any peripherals / spares other than above mentioned required for the system for working should be supplied along with the system.
5. A certificate from the original instrument manufacturer company will be required confirming about the availability of all essential spares / parts for at least 05 years after the expiry of one year standard warranty period.
6. The bidder may also visit the Department before submitting the instrument quote. No modification or requirement will be provided for the system at the time of installation by the Department. If there is a need of any utilities during the installation of instrument, then the requirement has to be fulfill ed / supplied by the bidder.
7. Should provide at least one year warranty certificate.
8. Should provide authorization certificate, instrument installation, demonstration and time to time service as and when necessary.
9. Must include all the cost like installation charges, taxes, on site delivery and other charges, if any.
58. Rice Straw Baller (Tender Fee: Rs.
1,500.00)
Round Baler tractor operated with specification 1. Capacity- 5 to 10 Ton/Hrs Working capacity minimum 2. Type twine- Jute (Binding Type)
3. Pickup width- 180 cm (minimum) 4. Automation Grade – Automatic 5. Blade Diameter - 50 Cm (minimum) 6. Blade Length- 700 mm (minimum) 7. Weight - 350 KG (minimum)
8. Overall Dimensions- 122x143x120 cm (minimum) Note:
1. Training is to be given onsite.
2. Warranty of instrument will start only after the installation of the implement.
3. All the above information for Round Baler should be clearly mentioned on instrument brochure from the manufacturing company is to be attached.
4. Any peripherals / spares other than above mentioned required for the system for working should be supplied along with the system.
5. Should provide at least one year warranty certificate.
6. Should provide authorization certificate, instrument installation, demonstration and time to time service as and when necessary.
7. Must include all the cost like installation charges, taxes, on site delivery and other charges, if any.
0.45
Page 93 of 104 59. BOD Incubator
(Tender Fee: Rs.
1,500.00)
We have required BOD incubator for the growth, development and maintains of different rice pathogen.
1. Ideal for applications that require temperatures ranging from +5°C to +60°C with excellent stability.
2. Single-setpoint microprocessor control for temperature setting.
3. Capacity: 12 cuft (300-325 liters) 4. Temperature Stability ±0.3ºC 5. Uniformity @ 37ºC ±0.8 / 1.0 ºC
6. Access port and RS232 for temperature monitoring.
7. Timer function for automatic start or shut down of unit (0 to 99 : 59 hours : minutes).
8. Over-and under temperature alarm.
9. Over temperature cut-out and fan motor overheating protection for additional safety.
10. Glass window in door for undisturbed inspection of samples.
11. Loading Capacity Per Shelf :15 kg / 33 lbs and 12. Number ofshelves at Least 4 to 5.
13. Machine should be Energy Efficient Power consumption less than 1200 watt
14. Certification: European Conformity.
15. Compatible servo stabilizer for the Machine.
16. Fitted with additional time function based lighting system.
Note:
1. Should provide at least one year warranty certificate.
2. Should provide authorization certificate, instrument installation, demonstration and time to time service as and when necessary.
3. Must include all the cost like installation charges, taxes, on site delivery and other charges, if any.
0.07
60. Seed Germinator (Tender Fee: Rs.
1,500.00)
Seed germinator required to study on the different aspect related to seed germinations and seed borne pathogens of rice.
Seed germinator quoted by the parties should meet the below mentioned specifications.
1. Capacity-Minimum 10 cuft.
2. Temperature range - 5 to 600C
3. Temperature controller - Digital PID controller 4. Temperature accuracy - ± 1% or better 5. Temperature sensor - PT-100
6. Humidity range - 50 to 90 % RH
7. Humidity controller - Digital PID controller 8. Humidity accuracy - Minimum ± 3%
9. Humidity sensor - Non condensing type 10. Humidity system - Ultrasonic humidifier
11. Light - 150 – 170 micromole / m2 / sec or better 12. Light timer - 24 x 7 weekly digital timer
13. Construction - Double walled
14. Exterior - Mild steel powder coated or better 15. Interior - Preferably stainless steel 304 or better 16. Number of shelves - 3 to 5
17. Power supply - 220 volts / 50 Hz Note:
1. Should provide at least one year warranty certificate.
2. Should provide authorization certificate, instrument installation, demonstration and time to time service as and when necessary.
3. Must include all the cost like installation charges, taxes, on site delivery and other charges, if any.
0.06
Page 94 of 104 61. Emasculator with
Other Accessories (Tender Fee: Rs.
1,500.00)
Emasculator for rice with all its required accessories should meet the below mentioned specifications.
1. It should be compact and portable.
2. It should be suitable for removal of parts of flowers for hybridization.
3. At least 4-5 people can work independently at one time and approximately 20-25 mbar pressure shall be attained through a single vacuum line for each user.
4. Pumping Speed: ≥10 l/min or better 5. Ultimate pressure: 100mbar approx.
6. Maximum over pressure: 2-2.5bar or better 7. Sound level: ≤55db or lesser
8. It should be fully concealed system and rodent proof.
9. It should have fabricated stand with suitable mounting accessories for safety and convenience with ON/OFF switch and MCB system.
10. It should have release valve with accessories.
11. It should have mechanical and electrical pressure regulator output nozzles and provided with emasculating needles.
12. Separate dial gauges should be attached to all vacuum lines so that each user can attain specific pressure required for the suction of anthers from plant.
13. The collection of anthers should be done in autoclavable collection jar.
14. It should have special purpose impedance protected motor and gyro sync pump.
15. It should have operating voltage : AC 230 volts, 50Hz, single phase power supply system with voltage regulatory system.
Note:
1. Should provide all accessories necessary for efficient and smooth functioning of emasculator.
2. Should provide at least one year warranty certificate.
3. Should provide authorization certificate, instrument installation, demonstration and time to time service as and when necessary.
4. Must include all the cost like installation charges, taxes and other charges, if any.
0.15
REGIONAL COTTON RESEARCH STATION, AAU, VIRAMGAM 62. DR Gin machine
with Autofeeder (Tender Fee: Rs.
1,500.00)
Quantity – 2 (Two) nos.
Double Roller Cotton Ginning Machine-54” Jumbo complete with 12G heavy duty auto feeder and all spares including all knifes, roller shaft fitted with leather washer duly pressed and grooved, all belts, 5 H.P. Electric motor, 1440 RPM, With Starter, Switch and Minimum 10 mtrs Cable with Foundation Bolt, Motor Pulley, including installation work and freight F.O.R at our station Viramgam
0.15
63. Conveyor for seed cotton
(Tender Fee: Rs.
1,500.00)
Quantity – 5 (Five) Set.
TAPER BELT CONVEYOR - Width 500 mm Length 86'-0'' ft. with 3 hp gear-motor set, make in :- 75 x 40 x 5 mm imsc, 50 mm dia rollar, bearings, 500 mm width Dunlop rubber belts, with joint, 2 mm g.i.sheets hoper inlet-outlet mouth set complete along with
installation charges for panel board, cable, switch board and other required equipments and freight F.O.R at our station Viramgam
0.30
Page 95 of 104
64. Delinting Machine This machine consists following three components, vendors are requested to quote separate price for each of following three components.
1. Delinting Machine 2. Ducting Pipeline Set 3. Blower set
The required technical specifications for each of these components are as mentioned below –
64.1 Delinting Machine (Tender Fee: Rs.
1,500.00)
Quantity – 3 (Three) nos.
Mini Model (appx. 36 saw) for laboratory purpose, High speed/latest design, Capable of delinting 25 kg cotton seed per hour including 5 BHP motor/960 RPM for saw shift and and 5 BHP MOTOR / 960RPM, for brush cylinder, Control panel wires etc.
Accessories:
Saw -176 pcs, Ribs- 60 pcs, Ratchet, Gear & Pawl – 10 pcs each along with installation charges for panel board, cable, switch board and other required equipment and freight F.O.R at our station Viramgam
0.27
64.2 Ducting Pipeline Set
(Tender Fee: Rs.
1,500.00)
Quantity – 1 (one) set.
Ducting pipeline set-1
make in :- 22 swg. g.i. sheets mouth, hoper, band, pipes, pvc pipe 6'' dia., aproxi. length 350' feet along with installation charges for panel board, cable, switch board and other required equipments and freight F.O.R at our station Viramgam
0.02
64.3 Blower Set (Tender Fee: Rs.
1,500.00)
Quantity – 1 (one) nos.
Blower set -1 with three phase electric motor 5HP, 2800 RPM min., impeller dia 600X100mm along with installation charges for panel board, cable, switch board and other required equipments and freight F.O.R at our station Viramgam
0.02
65 Lint Conveyor (Tender Fee: Rs.
1,500.00)
Quantity Set.- 1 (one)
TAPER BELT CONVEYOR - Width 500 mm Length 86'-0'' ft. with 3 hp gear-motor set
make in :- 75 x 40 x 5 mm imsc, 50 mm diarollar, bearings, 500 mm width Dunlop rubber belts, with joint, 2 mm g.i.sheets hoper inlet- outlet mouth set complete with five Lint mouth
make in :- 22 swg.gi.sheets mouth-hoper for d.r.gin to belt conveyor along with installation charges for panel board, cable, switch board and other required equipments and freight F.O.R at our station Viramgam
0.30
66.1 Seed Cleaner (Tender Fee: Rs.
1,500.00)
Quantity – 3 (Three) nos.
ROUND SEED CLEANAR WITH 2 HP GEAR-MOTOR SET – SZ;-L 5’-0’’ FT X W 3’-0’’ FT X H 4’-0’’FT. make in :- 75 x 4 mm ms.
Flatbars, 60 mm/50 mm/40 mm/25mm ms. 95 square pipes, magnet, v-belt pulleys, msspockets, ms chain, v-belts,2 mm ms.
Sheets, 2’’ ms brightbars,40 mm ms. brightbars,50 mm & 40 mm ms.ucp, 10 mm ms. Perforated, 2 mm ms, perforated sheets, complete set
With Cyclone two set – each 36” Diameter, angle bars stand AND Ducting pipe line set-1
make in :- 22 swg.gi. sheets mouth, hoper, band, pipes, pvc pipe 6''
0.22
Page 96 of 104
dia., aproxi. length 350' feet. along with installation charges for panel board, cable, switch board and other required equipments and freight F.O.R at our station Viramgam
66.2 Cleaner cum Grader (Tender Fee: Rs.
1,500.00)
Quantity – 2 (Two) nos.
Cleaner cum grader with 5 HP motor, Dimension 280x122x196 cms., Two Screen, Top Screen size 66x76 cm and Botton screen size 66x130 cms, Two air aspiration, one grading and one scalping, Pneumatic feedingalong with installation charges for panel board, cable, switch board and other required equipments and freight F.O.R at our station Viramgam
0.07
LIVESTOCK RESEARCH STATION, COLLEGE OF VS & AH, AAU, ANAND 67. Reaper (Maize &
Hybrid Napier diff.
varieties; Combined harvester, cutter, loader machine) – 2 Qty.
Type Row Independent
Chop sizes 5-15 mm
Working width More than 1 mtr
Number of rotor blades 4-6
Number of gathering drums 4-6
Power source Tractor PTO
Recommended power at PTO 45 to 75 hp
Recommended revolution at PTO 540
Price of attachments for other crops if available should be quoted separately in technical bid.
0.45