GOVERNMENT OF TELANGANA
COMMON SCHEDULE OF RATES AS PER
T.S STANDARD DATA FOR THE YEAR 2019-20
( Effective from 1 st June 2019 )
BOARD OF CHIEF ENGINEERS
S.No Description Page No.
From To 1 Part-I ( Irrigation & CAD Works) 01 24 2 Part-II ( Road & Bridge Works) 25 47
3 Part-III ( Building Works) 48 377
4 Part-IV ( Public Health Works) 378 483 5 Annexure-Latest GO’s –Seignioarge
Charges
MASTER
INDEX
Proceedings Part-1, Irrigation & CAD SoR 2019-20
(II)
The draft schedule of rates for the year 2019-20 as furnished by the Engineer- in-Chief (IW), I&CAD Dept., Engineer-in-Chief (NH&Bldgs), R&B Dept., Engineer-in- Chief (SR & CRN), R&B Dept., Engineer-in-Chief (PH), PH&ME Dept were discussed in detail and finalized in the annual Board of Chief Engineers meeting held on 10.06.2019 at 3.30PM in BOCE’s Conference hall, Jalasoudha, I&CAD Dept., Hyderabad.
The procedure for the adoption of Irrigation work items, lead & lift charges
(Common to all departments) is incorporated in the Annexure-A of schedule of rates (SoR).
The approved basic rates are applicable to the datas as per Revised Standard Data approved by the Government vide G.O.1
stcited.
The Government vide G.O. MS.No.15 T.R&B(R-1) Department Dt: 24.12.2014 have issued orders for adoption of MoRTH data by all Engineering Departments of Telangana State in respect of Road and Bridge works, with prevailing Standard Schedule of Rates in preparation of estimates. The Government approval is necessary to adopt any other data.
The lead & lift charges are common to all Engineering Departments. The detailed calculations are incorporated in the Lead & lift chapter in the I&CAD Works (Part-I) of Telangana Revised Standard Data.
One hard copy & compact disc containing Schedule of Rates is here with communicated.
No other items other than the items communicated by this office shall be introduced in the SoR.
The Heads of Department and Officers mentioned below are authorized to print the Schedule of Rates for the year 2019-20. The unauthorized printing & selling of the SoR is strictly prohibited. The Schedule of Rates for 2019-20 will be in force until the new SoR comes in to force.
Any discrepancies found (or) corrections required in SoR 2019-20 may be brought to the notice of the undersigned for issuing necessary corrigendum/
addendum.
The revised rates will come into force from 1st June of 2019.
Proceedings Part-1, Irrigation & CAD SoR 2019-20
(I)
Office of the Engineer-in-Chief (I.W) I&CAD Dept., Errum Manzil, Hyderabad Proc. No. ENC/IW/P&M/EE/DEE-2/AEE.4/SoR 2019-20/Vol.I Dt: 04.07.2019 Sub: Schedule of Rates as per Telangana Revised Standard Data for the year
2019-20 -Irrigation & CAD works(Part-I), Road & Bridge Works (Part-II), Building Work Items(Part-III) and Public Health Items (Part-IV)-approved- Printing & Communication of SoRs - Reg.
Ref: 1) G.O.Ms.No.49,I&CAD (PW:Reforms)Dept., dt:2.3.2009 2) ENC (PH) Lr.No. 146/AE4/T2/SoR 2019-20 dt. 12.06.2019
3) ENC (SR & CRN) R&B Dept Lr.No. 5040/EE(R)/DEE1/AEE/2019 dt. 28.06.2019
4) ENC(NH & Bldgs) R&B Dept Lr. No. DEEII/AE10/Bldgs/SoR 2019-20 Dt:18.06.2019
5) Industrial Consumer Price Index points obtained from Commissioner, Labour Department
6) Minutes of Board of Chief Engineers (BOCEs) meeting on finalization of Schedule of Rates 2019-20 held on 10.06.2019.
-::o0o::-
The Government have approved Revised Standard Data vide ref 1
stcited. The Schedule of Rates as per Telangana Revised Standard Data for the year 2019-20 is approved based on the following.
The Engineer-in-Chief (IW), I&CAD Dept., has furnished the draft rates proposed for Labour Rates and Basic data for Irrigation Items Part-I of Common SoR for the year 2019-20.
The Engineer-in-Chief (SR & CRN), R&B Dept has furnished the draft rates for the Part-II of Common SoR for Roads & Bridge items for the year 2019-20.
The Engineer-in-Chief (NH & Bldgs), R&B Dept has furnished the draft rates for the Part-III of Common SoR i.e., Buildings & Electrical items for the year 2019-20.
The Engineer-in-Chief (PH), PH&ME Dept has furnished Part-IV of Common
SoR for Public Health works items and Public Health Materials for the year 2019-20.
Proceedings Part-1, Irrigation & CAD SoR 2019-20
(III)
The receipt of the proceedings may be acknowledged.
Encl: SoR 2019-20 containing Part-I (Irrigation & CAD works), Part-II (Road &
Bridge works) Part-III (Buildings works) and Part-IV (Public Health works)
Sd/- B. Nagendra Rao; Dt:04.07.2019 Engineer-in-Chief(A.W)
Irrigation & CAD Department and Chairman, Board of Chief Engineers
I) Copy submitted to the Special Chief Secretary to Govt., I&CAD Dept., B-Block, Secretariat Buildings, Hyderabad for favour of information.
II) Copy Communicated to the following Heads of Departments along with Enclosures for information.
1) Engineer-in-Chief (NH & Buildings), Roads & Buildings Department.
2) Engineer-in-Chief (SR & CRN), Roads & Buildings Department 3) Engineer-in-Chief (P.H.), PH & ME Department.
4) Engineer-in-Chief (P.R.), Panchayat Raj Department.
5) Engineer-in-Chief (RWS) R W S & S, Department.
6) Copy of C.D containing Schedule of Rates 2019-20 & Standard data, Part-1 (Irrigation & CAD works) to all Engineers-in-Chief, Chief Engineers of Irrigation &
CAD Department for favour of information and necessary action.
III) Copy to the Superintending Engineer, Irrigation Circle, Irrigation & CAD Department, Red Hill, Hyderabad for necessary action.
IV) Copy communicated to the DEE (computers) with a request place the Proceedings in I& CADD department website for wide publicity.
Sd/- B. Nagendra Rao; Dt:04.07.2019 Engineer-in-Chief(A.W)
Irrigation & CAD Department and
Chairman, Board of Chief Engineers
Proceedings Part-1, Irrigation & CAD SoR 2019-20
(IV)
for Engineer-in-Chief(I.W)Important – Read the following ANNEXURE- A
1. The SPIU (Irrigation), Centre for Good Governance (CGG), Hyderabad has developed software package linking the basic input data of Irrigation with approved data of Irrigation work items.
2. The lead and lift charges are common to all Engineering Departments. The detailed calculations are incorporated in the Lead &Lift charges chapter in the I&CAD works (Part-1) of Telangana Revised standard data.
3. The estimate sanctioning authority shall physically verify each and every Irrigation work item data incorporated in the estimate with basic input data before sanction of the estimate. Any lapses or arithmetic errors arising in the sanction of data’s /estimate due to adoption of the software package lies entirely on the concerned estimate sanctioning authority only.
4. Any discrepancies / corrections required for improper basic input data appearing in the approved data’s of Irrigation work items in the software package and hard copy of SoR & Standard data’s (part-1) may be brought to the notice of undersigned for issuing corrections.
5. Estimate Sanction Authority shall examine the Components/Materials/Items proposed for arriving finished rate in the Data. Any Items Components/Materials/Items not required for that work, can be deleted by the Estimate Sanctioning Authority while according the approval to Datas.
Sd/- B. Nagendra Rao; Dt .04.07.2019
Engineer-in-Chief (A.W)
Irrigation & CAD Department and
Chairman, Board of Chief Engineers
Preamble-Common SoR 2019-20
(V)
Preamble (SoR 2019-20)
Common to all Engineering Departments
Preamble-Common SoR 2019-20
(VI)
Preamble-Common SoR 2019-20
(VII)
PREAMBLE
1. AREA ALLOWANCES:
A) CORPORATIONS & MUNICIPALITIES:
a) i. 25% extra over the basic rates on labour component of works is allowed in all Municipal Corporation Limits of Telangana except Greater Hyderabad (up to a belt of 12 Kms. from Municipal Corporation limits) and other corporations as notified by the Government from time to time.
ii.40% extra over the basic rates on labour component of works is allowed in Greater Hyderabad (up to a belt of 12 Km from Municipal Corporation limits).
b) 20% extra over basic rates on labour component of works is allowed in all District Headquarters and the remaining Municipal limits (up to a belt of 12 Kms from Municipal limits).
B) JAIL COMPOUNDS:
20% extra is allowed over labour rates for the works in the Jail compounds.
Only equivalent number of Man Mazdoor shall be provided in the Jail premises and no women Mazdoor are allowed inside.
C) INDUSTRIAL AREA:
20% over basic rates on labour component of works is allowed for works
situated within 10km belt of Industrial area of Jeedimetla, in Malkajgiri District,
Lingampally, Tandur, Ibrahimpatnam and Kothuru in Ranga Reddy District,
Patancheru, Ramachandrapur in Sangareddy District, Bibinagar in Yadadri-
Bhongiri District, Wadepally in Nalgonda District, Nagapally (Centenary Colony,
Begumpet “X” roads), Takkalapally, Ramagundam and Godavarikhani in
Peddapally District, Manchiryal, Mandamarri, Bellampalli in Manchiryal District,
Sarpaka, Kothagudem, Paloncha and Manguguru in Bhadradri-Kothagudem
Preamble-Common SoR 2019-20
(VIII)
district, Singareni Collieries area limits in Khammam and Bhadradri-Kothagudem, Jayashankar-Bhoopalpally and Mulugu districts.
D) AGENCY / TRIBAL AREAS:
a) 25% extra is allowed for the works located within the interior Agency / Tribal limits, i.e. for the works located within & upto16 KMs from any all-weather route inside Agency / Tribal.
b) 40% extra is allowed for the works located within the interior Agency / Tribal limits, i.e. for the works located beyond 16 KMs from any all- weather route inside Agency / Tribal.
NOTE:
1) No extra percentage is permissible in respect of Forest produce such as Bamboo, Rellu grass and for all materials obtained from outside the Agency / Tribal.
2) The extra percentage under Agency / Tribal areas allowance may be allowed on the labour component and on the labour charges in the rates for conveyance of materials.
3) The extra percentage on cost of materials in Agency / Tribal areas can be allowed on the labour component only, if they are manufactured in the Agency / Tribal areas itself except Forest produce.
E) GHAT ROADS:
For Ghat Roads and other roads steeper than 1 in 20, the length of the road may be taken as 1.5 times the existing length of the road for the purpose of leads only for conveyance of materials based on the certificate for the Ghat Road given by the Superintending Engineer concerned.
Foot Note: Under compelling circumstances, the concerned Chief Engineer can adopt the equivalent length of road as 2 ½ times of actual length.
Note:
Area allowances:
Preamble-Common SoR 2019-20
(IX)
If more than one area allowance (such as those) for (1) Municipalities (2) Agency / Tribal areas (3) Industrial areas are applicable for a particular situation, only the maximum out of the allowable percentages is to be allowed.
2. EXCAVATION OF TRIAL TRENCHES, TRIAL PITS AND EXCAVATION IN RESTRICTED PLACES: -
A). TRENCHES:
1) Trenches of not more than 2 meters in width : 25% extra B). TRIAL PITS:
1) Up to 2 Meters depth : 25% extra
2) 2 Meters to 4 Meters depth : 50% extra 3) 4 Meters to 6 Meters depth : 75% extra 4) 6 Meters to 8 Meters depth : 100% extra 5) 8 Meters to 9 Meters depth : 150% extra 6) More than 9 Meters depth : 200% extra C) EXCAVATION IN RESTRICTED PLACES:-
1) Foundation of Buildings : 75% extra
2) For pipe lines where the depth is 1.5 times or more than the width
: 75% extra
3) For pipe lines where the depth is 1.5 times or more than the width
: 120% extra
4) Silt removal in restricted areas such as U.T’s., Culverts and Syphons.
: 120% extra
5) Excavation of field channels : 75% extra 6) For narrow trenches not more than 2 meters
in width and depth not less than twice the width and for excavation of road boundary drains, model sections of canals.
: 75% extra
7) High berm cutting of not more than 150 mm average thickness and sectioning for roads
: 50% extra
Note: 1) The extra percentage is allowed over Common item for all earth works (COM-
MWRK- Manual Works) for corresponding soil and Standard data items. It
Preamble-Common SoR 2019-20
(X)
includes the charges for all lifts and initial lead but does not include dewatering charges if any in respect of all the items under (A) and (B) above.
2) The above extra percentages in respect of excavation in hard rock for restricted places are to be allowed for (2/3)rd of the cost and shall not to be allowed in respect of items involving blasting component which may be taken as 1/3 of the cost.
3. MANUFACTURED SAND:
As per GO Ms No 37 Industries and Commerce (Mines-I) Dept., dated 29.05.2018, the Government have directed all the Engineering works Departments to use Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 in all the mixes of Cement concrete and in the items of works where sand is used earlier, to reduce the burden on Natural Resources and to make the sustainable ecosystem. Accordingly, the Manufactured Sand/Rock Sand shall be substituted proportionately in respective data items.
4. FLY ASH BRICKS:
As per recommendations of Board of Chief Engineers dated 11.11.2016, and MoEF & CC amended Notification No S.O 254(E), dated 25.01.2016 all Engineering Departments shall mandatorily adopt Fly ash bricks and other Fly ash based products in Buildings and other allied works proposed within 100Km radius of fly ash generating Coal/Lignite based Thermal Power plants in Telangana.
5. CONVEYANCE OF BITUMEN (BULK AND PACKED) Packed Bitumen --- Rs 2.25 per Km/MT
Bulk Bitumen --- Rs 2.00 per Km/MT (Round the trip)
6. SEIGNIORAGE CHARGES
Note: The rates of the materials indicated in the SoR are exclusive of Seigniorage Charges.
Appropriate Seigniorage Charges for relevant materials as fixed by the
Government from time to time shall be kept in Part-II of Schedule-A i.e., under
reimbursable items as recommended by the Board of Chief Engineers.
Preamble-Common SoR 2019-20
(XI)
The concerned Technical sanctioning authority should ensure that the relevant Seigniorage charges of work items shall be reconciled separately duly excluding from the data, so that, the Seigniorage charges are not affected by quoted Tender percentage.
7. G S T (Goods & Service Tax):
The GST (Goods & Service Tax) on Works Contract shall be implemented as per orders of the Government from time to time. At present, GST @ 5% on Works Contract where in earth work component is 75% or more and for all other works GST @ 12% will be applicable.
GUIDE LINES
1) The Schedule of Rates (SoR) is formulated under four Parts, which are applicable to all the Engineering Departments and other Organizations under the control of Telangana State Government.
PART -1: Irrigation& CAD (Dam and Allied Works, Canals and Allied Works, Canal C.D. Works, Tunnels and Allied Works, Preliminary and Maintenance Works, Hydraulic Gates and allied works and Leads and Lifts applicable to all Departments.
PART -2: Roads and Bridges
PART -3: Buildings including Electrical Works
PART -4: Drinking Water Supply and Public Health (Only for works done by manual means)
2) Brief description of item of work. :
Brief description of the item of work to cover all important aspects of the work included in the Data. On reading the description of the item, the user should be in a position to assess the various cost components involved in the work.
3) Data for assessing quantities:
The data reflects various assessments / assumptions made in arriving at
the quantities of materials, machinery, labour and other in-puts. In case of
Preamble-Common SoR 2019-20
(XII)
plants and equipment the output of main plant is worked out and the requirement of all other inputs and assessed to match the output of the main plant. Cycle time of operations is the criteria for assessing the output of equipment. Generally the equipment manufacturers furnish the output of machinery under ideal conditions of working. Suitable job and management efficiency factors are considered while working out the average output of machinery under field conditions. In case of combination of machinery and manpower, the assessment of manpower shall match the output of machinery.
Though cycle time of operations is the criteria for hourly / daily out-put of machinery work-force, the actual progress of work depends on several other factors such as power interruptions, minor break-downs, time for meals and other needs of work-force, stray rains etc. Therefore, it is the general practice to consider 50 minutes as the actual working time per hour for working out the hourly / daily out-put of machinery / work-force. CWC / BIS guide-lines stipulate the actual working hours for the purpose of equipment planning and utilisation. The daily out-put is computed duly considering the actual available working time and feedback from the field.
• For gate and hoist works, it is the general practice to specify the quantity of work in terms of number of sets of embedded parts / gates. The requirement of machinery and work-force for cutting, bending, fabrication, erection, painting etc., is assessed to commensurate with the task involved.
• The data for gates and E.M. Parts is arrived per Metric Tonne (MT) quantity.
• The data for Hoists and Gantry Cranes is worked out on the basis of capacity in tonnage.
4) The lead and lift charges provided in SoR are generally applicable and
common to all Engineering Departments. Any item which is not covered in
this part, the rates as provided in the data of the relevant works may be
adopted in preparation of estimates.
Preamble-Common SoR 2019-20
(XIII)
5) Input Basic Materials needed for all works are listed and incorporated in the data. The requirements are analyzed and the specifications adopted shall confirm to Standards published by the BIS.
• The labour and material rates will be communicated by the Board of Chief engineers.
• Unless otherwise specified, all material rates shall be exclusive of GST.
• For Sand, Gravel, Murrum, Stones, Coarse Aggregates etc, the rates are ex-quarry/Stock yard, adding loading charges by machinery / manual means and idle hire charges of machinery as per table under chapter “ conveyance or lead and lift charges”, as applicable.
• For AC sheets, GI sheets, Hume pipes, wood and stone slabs, the rates are to be taken prevailing at major commercial centre near project area.
The lead charges, as applicable are to be added in preparing estimates
• For Steel and Cement, the rates are delivery at site excluding GST.
• The specifications of the aggregates for sizes and gradation and its adoption shall be as per IS 383.
6) The Labour component in the data is mentioned for unit work.
• No allowance towards labour importation and labour amenities added extra as they are included in the recommended overheads.
• On Labour Component: Certain additional allowances are added extra to the wages of labour (,i.e. only on labour component in the work item) in the form of percentage, as recommended by the Government/Board of chief engineers due to statutory and other provisions.
7) Hire Charges Of Machinery: The machinery and /or group of machinery For items of works and their output has been worked out based on the availability of machinery generally in the market and working in the field successfully, duly considering cycle time, idle time, operator efficiency, type of work etc.
• The hire charge of a machinery / equipment is worked out based on the
guidelines published by CWC and BIS codes.
Preamble-Common SoR 2019-20
(XIV)
• For the other machinery not covered by the list, the R&B and other users may adopt hire charges as recommended by the MORTH.
8) Lead Charges
• The high level committee has recommended to adopt, for conveyance by head load, a minimum lead of 50 meters and additional lead up to 150 meters in the intervals of 50 meters. Beyond 150 meters lead, only machinery rates are to be adopted.
• The basic work item rates provided in the Standard Data & Schedule of rates include 50 m or 1 km as initial lead and no lead charges shall be allowed where the source of material is within the initial lead specified in item rate. Additional lead charges shall be allowed for the lead exceeding initial lead specified in the item rate. The Guidelines may be followed regarding adding Lead charges as given against each chapter.
• For the materials where the basic rates are mentioned as “Quarry Rates”
in the SoR, which includes initial lead of 1.00km lead charges are to be added for the lead distances from the approved quarries as applicable
• The lead charges per unit quantity for conveyance of the materials are worked out, and included in the schedule of rates in increment of 50 m for head load and in increment of 1 km for mechanical mode.
• The rates for lead charges by head load up to 150 meters and by machinery up to 5 km, shall be cumulative and inclusive of lead charges for preceding lead. For lead beyond 5 km, the lead charges shall be worked out on per km basis.
9) Loading and Unloading Charges for Materials The following features are considered:
1) Loading and unloading charges are not payable for conveyance by head load.
2) Loading and unloading charges are not payable for conveyance by
mechanical means, for disposal of excavated material unless specified.
Preamble-Common SoR 2019-20
(XV)
3) The rates for unloading of materials except earth, sand, gravel, coarse aggregate, rubble, size stone and cut stone, are inclusive of stacking wherever applicable.
10) Lift Charges:
• The data includes initial lift charges of 3.0 meters ,for materials conveyance by head load, Additional leads in the interval of 1.0 meters are worked out, as additional labour input and incorporated in the chapter on” Lead and lifts” .
• Where the conveyance / lifting of material is done by mechanical means, lift charges shall not be considered, as the cycle time of operation of the machine includes lifts involved.
• The data and rates for lift charges is cumulative and are inclusive of rates for preceding lifts also.
11) Wastage of Materials
i) Cement: No wastage allowance is recommended towards the quantity of cement used in works, as the wastage is already included in the input and in major works bulk quantities are used.
ii) Steel: The wastage of steel @ 2.5% is allowed for gates and allied structures. For RCC works the wastage is @2.5% for the reinforcement rods above 36mm dia. and @ 5% for rods below 36mm dia. including overlaps, if they are not welded. If welding is adopted for the reinforcement rods even for below 36mm dia, 2.5% of wastage is only recommended.
12) In Respect of RCC Works, the rate for cement concrete for 1 cum is worked out separately for all grades based on Indian Standards. The rate of Reinforcement steel per MT is calculated separately and to be added in the estimates of RCC works as a separate item.
13) Soil Classification: The Committee recommended to allow uniform
classification of soils for all Departments and data is worked out accordingly.
Preamble-Common SoR 2019-20
(XVI) 1. All soils
2. Marshy soil
3. Ordinary rock (Not Requiring Blasting), 4. Hard rock
a. Hard Rock (Requiring Blasting) b. Hard Rock (Controlled Blasting)
c. Removable by Chiseling (Blasting Prohibited) 14) Use of Super Plasticizers and Admixtures:
Concrete admixtures such as Air-Entraining Agent (AEA) / Water reducing agent can be used advantageously for better quality concrete. The high level committee has recommended to adopt for super plasticizers and admixtures at 0.4% on cement for concrete work as per MORTH standards for batching plants.
15) Contractors overheads, profit and other provisions:
• The provisions allowed in G.O.Ms.No.94, I&CAD, dated 01.07.03, need not be added separately for the items covered in the contractor overhead charges.
• For all Road & Bridge works Overheads & Contractors profit shall be allowed as specified in the MoRTH Stardard Data Book.
• Overheads and Contractor’s profit @ 13.615% shall be allowed in the data which includes labour importation and amenities etc. as mentioned below.
The overhead charges include the following elements:
i. Site accommodation, setting up plant, access road, water supply, electricity and general site arrangements.
ii. Office furniture, equipment and communications iii. Expenditure on:
a. Corporate office of contractor b. Site supervision
c. Documentation and “as built” drawings
iv. Mobilisation/ De-Mobilisation of resources
Preamble-Common SoR 2019-20
(XVII)
v. Labour camps with minimum amenities and transportation to work sites.
vi. Light vehicles for site supervision including administrative and managerial requirements.
vii. Laboratory equipment and quality control including field and laboratory testing.
viii. Minor T & P and survey instruments and setting outworks, including verification of line, dimensions, trial pits and bore holes, where required.
ix. Watch and ward
x. Traffic management during construction xi. Expenditure on safeguarding environment xii. Sundries
xiii. Financing Expenditure
16) Role of Central Competent Agency For Schedule Of Rates (Board Of Chief Engineers)
a) The Board of Chief Engineers under the Chairman ship of Engineer-in- Chief, (Administration) I&CAD Department is the competent authority to finalize and recommend the Schedule of Rates applicable for all Engineering Departments. The Board has to assess and incorporate only the three basic inputs required to generate unit work item rates as below.
Basic rates of labour:
Wages of labour commonly required in execution of works has to be arrived and incorporated in the schedule of rates (Basic input of Labour wages), without adding extra towards area allowances (like municipality allowance, tribal area and ghat road allowances etc, which shall be added to the rates where applicable in the form of separate percentage as explained in the preceding paras. The rates shall be the prevailing daily rates in the State and shall not be less than the minimum wages fixed by the Government from time to time.
Materials Rates:
Preamble-Common SoR 2019-20
(XVIII)
The basic input material rates common to all departmental works are listed out and incorporated (in the chapter “Basic inputs”) The material specifications adopted shall confirm to Standards published by the BIS.
The Prevailing market rates for all basic input materials shall be obtained from the major commercial centers near the project areas. Average of the rates, ignoring freak rates, shall be reckoned as the prevailing market rate excluding all taxes viz., GST.
For sand, gravel, murrum, stones, aggregates etc., the rates are ex- quarry/stock yard including loading charges and idle hire charges. For steel, Cement, AC sheets, GI sheets, Hume pipes, wood and stone slabs, the rates prevailing at major commercial centre near project area has to be adopted.
Use Rate of Machinery:
The third parameter for incorporation in the Basic Inputs, is the use rate of machinery. To arrive at the use rate of machinery, the inputs to be incorporated are
• The list and capital cost of machinery required to be used in the construction activity, The rate has to be obtained from major manufacturers and outlet sources and the rate shall be the current market price excluding all taxes and duties i.e G.S.T etc. and including freight charges.
• The prevailing fuel charges of petrol and diesel are ascertained and average rate adopted
• Borrow rate of interest as fixed by the Government/competent authority be indicated.
• For the other machinery not covered by the list, the R&B and other users may adopt hire charges as recommended by the MORTH
c) The Chairman, Board of Chief Engineers(BOCEs) or competent authority
appointed by the Government, based on the approved basic inputs, load
the above three basic parameters in the software program. The unit rate
of all works including hire charges of all machinery will be generated
automatically for adoption.
Preamble-Common SoR 2019-20
(XIX)
The Chairman, BOCEs shall communicate the uniform Schedule of rates arrived from Standard Data, to all users for uniform and direct adoption in all infrastructure Departments, as applicable.
Engineer-in-Chief (State Roads & CRN) R&B Department
Sd/- B.Nagendra Rao Dt 04.07.2019 Engineer-in-Chief (IW) I & CAD Department and Chairman, Board of Chief Engineers
Engineer-in-Chief (NH & Buildings), R&B Department
Engineer-in-Chief (PH) PH & ME Department
ANNEXURE (For Buildings)
1) The committee comprising of Chief Engineers of departments in-charge of execution of building works for finalization of Standard Schedule of Rates for Buildings (Electrical & Civil), constituted vide G.O. Rt. No: 471 TR&B (R-1) Dept., Dt. 20.4.2007, has agreed to have a separate ‘Schedule of Rates’ for Buildings (Civil & Electrical). The meeting of the above “SoR Committee for Telangana Buildings (Civil & Electrical)” was convened on 13-06-2019 with an objective to finalize and release the Telangana Buildings-SoR: 2019-20.
2) The rates of labour, common materials & work items, Public Health items, conveyance rates of materials & hire charges approved and published in Common SoR-2019-20 remain applicable. The specifications, stipulations & all other conditions of Common-SoR other than those specified in this context remain applicable.
3) The committee of Chief Engineers on Buildings-SoR: 2019-20 (Civil & Electrical) has met in the chambers of Chief Engineer(R&B), Buildings on 13.06.2019 at 3.00 P.M. and approved the Telangana Buildings SoR: 2019-20.
4) SSR Rates for Civil, Sanitary & water supply items are purely for the guidance of
the officers in preparation of estimates vide Para 113 of APPWD code. Authority
Preamble-Common SoR 2019-20
(XX)
who prepares the estimate is however responsible for proper rates as envisaged in Para 45 of APPWD code.
5) The rates published in the Buildings SoR are ceiling rates and the estimate preparing authorities are responsible for the correctness and reasonableness of the rates and technical specifications adopted in the estimates.
6) Over Heads and Contractor’s profit @13.615% shall be allowed in electrical Data
for all original works on par with the main civil works irrespective of Executing
Agency i.e., either civil or electrical contractor.
Preamble-Common SoR 2019-20
ANNEXURE (For Buildings)
1) The committee comprising of Chief Engineers of departments in-charge of execution of building works for finalization of Standard Schedule of Rates for Buildings (Electrical & Civil), constituted vide G.O. Rt. No: 471 TR&B (R-1) Dept., Dt. 20.4.2007, has agreed to have a separate ‘Schedule of Rates’ for Buildings (Civil & Electrical). The meeting of the above “SoR Committee for Telangana Buildings (Civil & Electrical)” was convened on 13-06-2019 with an objective to finalize and release the Telangana Buildings-SoR: 2019-20.
2) The rates of labour, common materials & work items, Public Health items, conveyance rates of materials & hire charges approved and published in Common SoR-2019-20 remain applicable. The specifications, stipulations & all other conditions of Common-SoR other than those specified in this context remain applicable.
3) The committee of Chief Engineers on Buildings-SoR: 2019-20 (Civil & Electrical) has met in the chambers of Chief Engineer(R&B), Buildings on 13.06.2019 at 3.00 P.M. and approved the Telangana Buildings SoR: 2019-20.
4) SSR Rates for Civil, Sanitary & water supply items are purely for the guidance of the officers in preparation of estimates vide Para 113 of APPWD code. Authority who prepares the estimate is however responsible for proper rates as envisaged in Para 45 of APPWD code.
5) The rates published in the Buildings SoR are ceiling rates and the estimate preparing authorities are responsible for the correctness and reasonableness of the rates and technical specifications adopted in the estimates.
6) Over Heads and Contractor’s profit @13.615% shall be allowed in electrical Data
for all original works on par with the main civil works irrespective of Executing
Agency i.e., either civil or electrical contractor.
PART-I
IRRIGATION & CAD
WORKS
BASIC DATA FOR
IRRIGATION WORK ITEMS
PART-1 INDEX
IRRIGATION & CAD WORKS
S.No. Description Page No
From To
1 Irrigation Work Items 01 14
2 Labour Rates 15 19
3 Hire Charges 20 22
4 Conveyance Charges of Materials 23 24
Part-1 Material Rates Common SoR 2019-20
1 Acetylene gas cum 350
2 Asphalt 80/100 Grade Kg 42
3 Binding wire Kg 55
4 Burnt stone slab 10 cm thick sqm 250
5(a) Ordinary Portland Cement (43/53 GRADE)
*(Note: As per Monthly rate fixed by SubCommittee) tonne 5300 5(b) Portland Pozzolona cement
*(Note as per monthly rate fixed by committee) tonne 5100 5(c) Portland Slag Cement
*(Note as per monthly rate fixed by sub-committee tonne 4800
6 Chequered plate Kg 53
7 Coarse aggregate 10-4.75 mm(excluding Seigniorage
charges) cum 760
8 Coarse aggregate 20-10 mm(excluding Seigniorage charges) cum 990 9 Coarse aggregate 40-20 mm(excluding Seigniorage charges) cum 890 10 Coarse aggregate 80-40 mm(excluding Seigniorage charges) cum 510
Scheduled Rates for the Year 2019-20
(Rs) IRRIGATION WORK ITEMS
FOR THE YEAR 2019-20
The aggregate rates mentioned above (from Sl.No.7 to Sl.No.10) are exclusive of Seigniorage charges but including blasting charges of Rs.70/cum and 25% machine crushing charges. However, if the metal is obtained from hand broken, the blasting and crushing charges shall be deducted. The aggregate shall be HB Stone of Granite, Dolamite, Dolerite and Trap. (Quartzite and Basalt with aggregate impact of less than 20)
BASIC DATA FOR
STATEMENT OF RATES FOR MATERIALS
General Guide Lines for Revising Rates of Materials
1.Average of the pevailing market rates, ignoring freak rates, is the criteria for fixing market rates for materials
2.The rates for materials is exclusive of Seignorage charges wherever applicable
3.The rates for materials, except those for which lead charges are admissible as per the statement of lead charges, shall be for all leads.
4.The rates provided for useful rubble/stone chips from excavation shall be at dump yard
SI.
No. Description Unit
Page 1 of 483
Part-1 Material Rates Common SoR 2019-20
Scheduled Rates for the Year 2019-20
(Rs) SI.
No. Description Unit
11 Coir brush Each 45
12 Copper sheet 16 SWG kg 625
13 Coursed rubble stone 30 x 30 x 45 cm(excluding Seigniorage
charges) Each 24
14 Coursed rubble stone 30 x 30 x 60 cm(excluding Seigniorage
charges) Each 30
15 Curing Compound Ltr 119
16 D - cord Rm 9
17 Delay - noiseless trunk Each 18
18 Detonating fuse coil Rm 7
19 Detonating shock tube / Cord relays Rm 32
20 Detonator delay type Each 16
21 Detonator electric Each 10
22 Detonator ordinary Each 8
23 Empty cement bag Each 6
24 Explosive ANFO kg 58
25 Explosive ANFO high strength booster kg 70
26 Explosive small dia ( Kelvex-220 or equivalent) kg 75 27 Fine aggregate/ sand(un- screened) for Concrete, Filtering
items,Filling & Blindage) (excluding Seigniorage charges) cum 570 27(a) Fine aggregate/Sand(unscreened) for filling(excluding
Seigniorage charges) cum 570
28 Fine aggregate /Sand (Screened) for Mortar,Plastering items
and Sand blasting items(excluding Seigniorage charges) cum 760
29 Geo-textile ( filter fabric ) 160 gsm sqm 36
30 Geo-textile ( filter fabric ) 200 gsm sqm 45
31 Geo-textile ( filter fabric ) 250 gsm sqm 54
32 G I Pipe 100 mm dia B Class Rm 710
33 G I Pipe 15 mm dia A class Rm 85
34 G I pipe 25 mm dia A class Rm 140
Page 2 of 483
Part-1 Material Rates Common SoR 2019-20
Scheduled Rates for the Year 2019-20
(Rs) SI.
No. Description Unit
35 G I pipe 40 mm dia B class Rm 225
36 G I pipe 50 mm dia A class Rm 250
37 G I Pipe 80 mm dia B Class Rm 460
38 G.I Bolts / Nuts and Washers kg 90
39(a) G.I sheet ( plain ) tonne 56000
39(b) G.I Sheet corrugated tonne 58000
40 Hariyala turfing sods sqm 35
41 Hectometer stone one line dressed Each 300
42 Hemp yarn kg 75
43 Honne wood planks cum 62000
44 Hume pipe with collar 150 mm dia (NP2) PH Rate Rm 300 45 Hume pipe with collar 300 mm dia (NP2) PH Rate Rm 530
46 J- Bolts 30 cm long Each 38
47 Jungle wood planks cum 26000
48 Khandki stone 15 to 20 cm height Each 13
49 Khandki stone 20 to 25 cm height Each 16
50 Khandki stone 25 to 30 cm height Each 18
51 Kilometer stone one line dressed Each 490
52 LDPE sheet ( Geo membrane ) 500 micron thick sqm 90 53 LDPE sheet ( Geo membrane ) 750 micron thick sqm 125 54 LDPE sheet ( Geo membrane ) 1000 micron thick sqm 176
55 M S Bolts / Nuts / Washers kg 75
56 Murum(including loading charges but excluding
Seigniorage charges ) cum 225
57 Oxalic acid Ltr 85
58 Oxygen gas cum 46
59 PVC sealing strip Rm 45
60 PVC water stopper 310 mm wide Rm 415
61 PVC pipe of 100 mm dia Rm 160
Page 3 of 483
Part-1 Material Rates Common SoR 2019-20
Scheduled Rates for the Year 2019-20
(Rs) SI.
No. Description Unit
62 Reinforcement steel (HYSD/TMT ) from primary steel producers like TATA,SAIL,VSP,JSW, Shyam Steel and GOEL TMT *(Note: As per Monthly rate fixed by Sub- Committee)
tonne 44000
63 Resin bond Cement capsule Each 50
64 Rough stone 20 x 20 x 75 cm ( Including Loading charges
but excluding Seigniorage Charges) Each 35
65(a) Shahabad stone slab polished (including loading charges
but excluding Seigniorage charges) sqm 240
65(b) Shahabad stone slab non-polished (including loading
charges but excluding Seigniorage charges) sqm 225
66 Stone chips (at dump yard/Spoil)(including loading charges
but excluding Seigniorage charges) cum 200
67 Stone chips ( at quarry )(including loading charges but
excluding Seigniorage and Blasting charges) cum 485 68 Structural steel angle / channel / beam / bars
Note: As per Monthly rate fixed by Sub-Committee tonne 45000 69 Structural steel plate/flats (Including Loaing Charges)
Note: As per Monthly rate fixed by Sub-Committee tonne 46000 70 Super Plasticizer (Conplast RP-264 or equivalent ) kg 58
71 Synthetic Enamel paint 1st quality Ltr 200
72 Synthetic adhesive ( Resin + Hardener ) Kg 285
73 Tar felt joint filler board 12 mm thick sqm 379
74 Tar felt joint filler board 20 mm thick sqm 580
75 Through stones 20 x 20 x 30 to 45 cm (including loading
charges but excluding Seigniorage charges) Each 26
76 Through stones 25 x 25 x 45 to 60 cm long (including loading
charges but excluding Seigniorage charges) Each 45
77 Through stones 30 x 30 x 65 to 75 cm long (including loading
charges but excluding Seigniorage charges) Each 65
78 Un-coursed rubble stones ( at dump yard /Spoil) (including
loading charges but excluding Seigniorage charges) cum 180 79 Un-coursed rubble stones ( at quarry )( including loading
charges but excluding Seigniorage charges) cum 350
80 Water proofing compound kg 95
Page 4 of 483
Part-1 Material Rates Common SoR 2019-20
Scheduled Rates for the Year 2019-20
(Rs) SI.
No. Description Unit
81 Welding electrodes 4 mm dia Each 11
82 Wire brush Each 38
83 Wire mesh 20 gauge sqm 220
84 Zinc chromate red Oxide primer paint (as per BIS) Ltr 160
85 Inorganic zinc silicate Ltr 480
86 Solvent less coal tar Epoxy Paint Ltr 206
87 Zinc phosphate primer (as per BIS) Ltr 170
88 Allkyd based iron oxide paint (as per BIS) Ltr 151
89 a) Cost of HDPE (80mm dia) Rm 170
89 b)Light black MS casing pipe 80mm dia (4mm thick) Rm 574
90 Welded steel wire fabric 100X100X5 mm size Kg 155
91 Protective Mastic Ltr 401
92 Solventless coal tar epoxy (brown) Ltr 206
93 Excavation of drain with Excavator cum 40
94 Crushed stone sand/Rock sand 4.75mm to 2.36 mm as per
IS 383 (1970) (excluding Seigniorage charges) Cum 570 95 Fly ash conforming to IS: 3812 ( Part II & I) Cum 72
96 Benching old embankment slopes 0.45 X 0.45 M RM 6
97 Laying of Sand Bags in the stipulated places including cost of empty cement bag, sand, thread, stitching charges and labour charges etc., with 13.615% overhead charges and contractors profit.
per bag 30
98 Rough stone for revetment 225mm thick ( including Loading
charges but excluding Seigniorage charges) cum 210
99 Eradication of Weed growth from Drains, Canals by
spraying Chemicals sqm 3
100 Thinner Ltr 75
101 Credit for excavated rock found suitable for use Cum 210 102 Earth Cost or compensation for earth taken from private
land (Excluding Seigniorage Charges) Cum 65
Page 5 of 483
Part-1 Material Rates Common SoR 2019-20
SI.
No. Description Unit
Scheduled Rates for the Year 2019-20
(Rs)
1 Alloy steel ( IS : 1570-carbon steel ) shafts Kg 220
2 Alloy steel ( IS : 1570-stainless steel ) pins Kg 380
3 Bolt / Nut / Washer ( hot dipped galvanized ) Kg 110
4 Bolt / Nut / Washer ( stainless steel ) Kg 312
5(a) Bronze (IS:305)bearings/bushes Kg 844
5(b) Aluminium (IS:305)bearings/bushes Kg 375
6 Cast iron blocks Kg 72
7 Cast steel drums / gears Kg 213
8 Cast steel pinions Kg 200
9 Cast steel wheels / pulleys / hubs / rollers / retainers Kg 160 10 Chemical for de-greasing/ derusting/phosphate coating Ltr 135
11 Coal tar epoxy paint Ltr 211
12 Forged steel hooks / shackles Kg 235
13 MS pipe 200 / 300 mm dia Kg 150
14 MS pipe 32 mm dia Rm 174
15 MS pipe 25 mm dia Rm 144
16(a) Rubber bottom seal ( IS : 11855 ) 120 X 16 mm Rm 700 16(b) Rubber bottom seal ( IS : 11855 ) 120 X 20 mm Rm 835 17(a) Rubber side seal ( music note type Teflon claded ) ( IS : 11855
) 36Ø 113 X 14 mm Rm 1350
17(b) Rubber side seal ( music note type Teflon claded ) ( IS : 11855
) 50Ø 125 X 16 mm Rm 2050
MATERIALS FOR GATES & HOISTS
FOR THE YEAR 2019-20 GUIDELINES :
1.For Cast steel/ Alloy steel/Forged Steel/Bronze, aluminium alloy components the rates shall be inclusive of cost of basic metal for these components, casting/forgingcharges, machining charges and applicable excise duty on finished alloy component
2.For other materials the rates shall be prevailing market rate
Page 6 of 483
Part-1 Material Rates Common SoR 2019-20
SI.
No. Description Unit
Scheduled Rates for the Year 2019-20
(Rs) 18(a) Rubber side seal ( music note type uncladed ) ( IS : 11855 )
36Ø 113 X 14 mm Rm 1175
18(b) Rubber side seal ( music note type uncladed ) ( IS : 11855 )
50Ø 125 X 16 mm Rm 1780
19 Rubber side seal Z-type ( IS : 11855 ) Rm 1700
20(a) Rubber corner seal ( Teflon claded ) ( IS : 11855 ) 36Ø 113 X
14 mm Each 2750
20(b) Rubber corner seal ( Teflon claded ) ( IS : 11855 ) 50Ø 125 X
16 mm Each 3600
21(a) Rubber corner seal ( un claded ) ( IS : 11855 ) 36Ø 113 X 14
mm Each 2532
21(b) Rubber corner seal ( un claded ) ( IS : 11855 ) 50Ø 125 X 16
mm Each 3376
22 Stainless steel plates / flats Kg 260
23 Welding electrode 4 mm dia x 450 mm ( radiographic low
hydrogen ) Each 17
24 Welding electrode 4 mm dia x 450 mm ( stainless steel ) Each 23
25 Wire rope 6x37 constn ( IS : 2266 ) Kg 203
26 Zinc Kg 175
27 Zinc rich ( zinc content : 90 % ) epoxy primer Ltr 587
Page 7 of 483
Part-1 Material Rates Common SoR 2019-20
1 Agitator car / Transit mixer 2 cum ( excluding tyres ) Each 2260000
Tyres and tubes 6 sets 92500
2 Air compressor 5 cmm electric Each 715000
3 Air compressor 7 cmm diesel Each 960500
4 Air compressor 7 cmm electric Each 870000
5 Air compressor 8.5 cmm diesel Each 1088500
6 Air compressor 8.5 cmm electric Each 1125000
7 Air compressor 15 cmm electric Each 1375500
8 Angle Dozer 90 hp Each 5500000
9 Batching plant 0.5 cum with accessories Each 1245000
10 Batching plant 2 x 1.00 cum with accessories Each 4290000 11 Batching plant 2 x 1.50 cum with accessories Each 5650000
12 Bending machine Each 555500
13 Clamp shell and hoisting ropes Each 30500
14 Concrete bucket 1.5 cum Each 56000
15 Concrete hand mixer 45/30 ltr Each 16250
16 Concrete mixer 300/200 ltr(diesel) Each 155000
17 Concrete mixer 300/200 ltr ( electric ) Each 149000
18 Concrete mixer 600/400 ltr(diesel) Each 265500
19 Concrete mixer 600/400 ltr ( electric ) Each 260000
20 Concrete paver 100 Sqm / hr Each 2400000
SI.
No. Description Unit
DETAILS OF CAPITAL COST OF MACHINERY / EQUIPMENT
FOR THE YEAR 2019-20
GUIDELINES FOR FIXING CAPITAL COST OF MACHINERY/EQUIPMENT 1.The Capital cost of Machinery/Equipment shall be prevailing market rates.
2.The cost of transport vehicles/ equipment shall be exclusive of cost of tyres and tubes.
3.The cost of drill rods/ drill bits/ air hose/ water hose/ road tax/ insurance charges and other consumable accesories shall not be included in the capital cost
4.In cases where the capital cost of machinery/ equipment could not be collected through enquiries, the capital cost considered for previous year may be updated on the basis of average percentage increase/ decrease in the index for machinery published in the RBI Bulletin
Scheduled Rates for the Year 2019-20
(Rs)
Page 8 of 483
Part-1 Material Rates Common SoR 2019-20
SI.
No. Description Unit
Scheduled Rates for the Year 2019-20
(Rs)
21 Convey mucker ( excluding tyres ) Each 3885000
21(a) Tyres and tubes 6 sets 91500
22 Core drilling machine Each 1152000
23 Diesel generating set 30 KVA Each 535000
24 Diesel generating set 50 KVA Each 750000
25 Diesel Loco 45 hp Each 2135000
26 Dewatering pump 5 hp diesel Each 34000
27 Dewatering pump 5 hp electric Each 25200
28 Dewatering pump 10 hp diesel Each 63000
29 Dewatering pump 10 hp electric Each 57000
30 Dewatering pump 20 hp diesel Each 205000
31 Dewatering pump 20 hp electric Each 105000
32 Drifter Each 1105000
33 Drilling jumbo ( excluding tyres ) Each 1350000
33(a) Tyres and tubes 6 sets 92000
34 Dumper 4.5 cum ( excluding tyres ) Each 1550000
34(a) Tyres and tubes 6 sets 93000
35 Geophysical Ele.resistivity meter Each 505000
36 Grouting pump Each 152000
37 Guniting / sand blasting equipment Each 290000
38 Ice plant with accessories 30 t / day Each 2400000
39 Jack hammer Each 73000
40 Needle vibrator 40 mm petrol Each 15000
41 Needle vibrator 40 mm electric Each 14000
42 Needle vibrator 60 mm petrol Each 16750
43 Needle vibrator 60 mm electric Each 15500
44 Planing machine 4 m stroke Each 785000
45 Plate shearing machine up to 12 mm Each 455000
46 Pneumatic placer 0.5 cum Each 593000
47 Pneumatic tamper Each 86500
48 Pug cutting machine Each 17500
49 Pusher leg Each 52500
Page 9 of 483
Part-1 Material Rates Common SoR 2019-20
SI.
No. Description Unit
Scheduled Rates for the Year 2019-20
(Rs)
50 Road roller diesel 10 t Each 930000
51 Shovel 0.50 cum 75 hp Each 3800000
52 Shovel 0.85 cum 110 hp Each 6400000
53 Stationery derrick crane 5 t Each 655000
54 Tipper 5 cum ( excluding tyres ) Each 1650000
54(a) Tyres and tubes 6 sets 92000
55 Tipping tub 1.5 cum Each 262000
56 Tower crane 5 tonne Each 7750000
57 Transformer 250 KVA Each 450000
58 Truck 10 t ( excluding tyres ) Each 1500000
58(a) Tyres and tubes 6 sets 92000
59 Truck mounted derrick crane 5 t ( excluding tyres ) Each 2260000
59(a) Tyres and tubes 6 sets 93000
60 Upright drilling machine Each 58000
61 Ventilation fan 20 hp Each 265000
62 Vibratory pad foot roller 8 t Each 2965000
63 Wagon drill Each 652000
64 Water tanker 8000 ltr ( excluding tyres ) Each 1445000
64(a) Tyres and tubes 6 sets 93000
65 Welding set Each 48000
66 Winch 35 HP Electric Each 380000
67 Hydraulic Truck Crane 30T Each 15000000
67(a) Tyres and tubes 6 sets 193000
68 Hydraulic Truck Crane 16T Each 10200000
68(a) Tyres and tubes 6 sets 195000
69 Heavy Duty Airless Spray Painting Equipment Each 492000
Page 10 of 483
Part-1 Material Rates Common SoR 2019-20
1 Casing shoe bit Each 9100
2 Diamond core bit BX size Each 9750
3 Diamond core bit NX size Each 11250
4 Double tube core barrel Each 12150
5 Extension drill rod with coupling sleeve Rm 2215
6 Jack hammer drill rod 1.5 m Each 4750
7 Jack hammer drill rod 2.5 m Each 5900
8 Nozzle for Guniting / sand blasting gun Each 710
9 Paving Cylinder Each 24500
10 Rails 30R ( 30 kg / m ) tonne 47750
11 Reamer shell Each 5100
12 T.C. Cross bit 50 mm dia Each 4430
13 T.C. Cross bit 75 mm dia Each 10350
14 T.C. Cross bit 100 mm dia Each 12164
15 Tyres and Tubes for truck Set 15700
16 Wire rope 16 mm dia Rm 230
Scheduled Rates for the Year 2019-20
(Rs)
ACCESSORIES TO MACHINERY / EQUIPMENT
FOR THE YEAR 2019-20
SI.
No. Description Unit
Page 11 of 483
Part-1 Material Rates Common SoR 2019-20
1 Air hose 25 mm dia Rm 155
2 Air hose 50 mm dia Rm 230
3 Demand charges (HT-I : General-11 KVA category) on power supply
KVA /
month 390
4 Diesel Ltr 72.33
5 Electric power (HT-VIII Category) including tax (1.5 times of
the Tariff of HT-I(A): General-11 KVA category) Kwhr 10
6 Excise duty on Gates / Hoist supplies % 0
7 Insurance charges on machinery % / annum 0
8 Interest on capital cost % / annum 9
9 Lubricants Ltr 240
10 Petrol Ltr 76.08
11 Rivets Kg 90
12 Road tax on transport vehicles Rs./ annum R.T.A
13 Shalimastic sealing compound Kg 94
14 Shutter oil Ltr 32
15 Structural steel fabrication Kg 26
16 Sundries ( Lump sum for un quantified inputs ) LS 22
17 Water hose ( pressure ) 20 mm dia Rm 150
18 Steel wedges LS 17
19 Elbows / Nipple / Plugs etc. LS 18
20 Soldering materials LS 17
21 Steam circulation arrangement LS 18
22 Fuel charges ( gas for heating ) LS 17
SI.
No. Description Unit
OTHER COSTS ON MATERIAL / MACHINERY / EQUIPMENT FOR THE YEAR 2019-20
1.The rate provided for 'Sundries' (Lump sum provision for unquantified inputs in the data rates) shall be updated on the basis of general percentage crease/ decrease in the market rates or on the basis of R.B.I 'All Commodity' index
2.The rate for Structural steel fabrication shall include cost of all materials (except Structural steel), machinery, labour and one coat of primer painting
3.Demand charges and electric power charges shall be as per prevailing TSCPDCL tariff
4.Rate of interest on capital cost shall be as approved by Govt or other competent authority
Scheduled Rates for the Year 2019-20
(Rs)
Page 12 of 483
Part-1 Material Rates Common SoR 2019-20
SI.
No. Description Unit
Scheduled Rates for the Year 2019-20
(Rs)
23 Vulcanizing materials LS 18
24 Gas cutting set ( 2 Nos 15 m hose and nozzle unit ) Each 14800
25 Grease Kg 240
26 Welding holder set ( cable / holder / gloves / mask etc ) Each 8200
27 Use rate of ropes LS 150
Page 13 of 483
Part-1 Material Rates Common SoR 2019-20
1 Worm reducers Each 195000
2 Electric motor 20 hp(Double Shaft) Each 108000
3 Electric motor 17.5 hp(Double Shaft) Each 75000
4 Electric motor 12.5 hp(Double Shaft) Each 64500
5 Electric motor 5 hp(Double Shaft) Each 30500
6 Electric motor 3 hp (Double Shaft) Each 21000
7 Electric motor 2 hp (Double Shaft) Each 11000
8 Floating shaft 300 mm dia Kg 175
9 Manual operating system Each 27500
10 Gate position indicator Each 210000
11 Ele-magnetic brake Each 33000
12 Electric cable / switch / control panel etc LS 57500
13 Wire rope sockets Each 4750
Scheduled Rates for the Year 2019-20
(Rs) OTHER COSTS ON MATERIAL / MACHINERY / EQUIPMENT
FOR THE YEAR 2019-20
SI.
No. Description Unit
Page 14 of 483
LABOUR RATES
Part-1 Labour Rates Common SoR 2019-20
7 SI.
No. Category of Worker
Scheduled Rates for the Year 2019-20
(Rs) I.
1 Bar bender 590
2 Black smith / Tin smith / Rivetor 495
3 Blaster ( Licensed ) 590
4 Carpenter Cl- I 590
5 Electrician ( Licensed ) 565
6 Fitter Cl- I 565
7 Floor Polisher / Tile Layer 495
8 Foreman 580
9 Gauge reader 490
10 Maistry / Work Inspector 590
11 Mason Cl- I / Brick layer Cl- I 500
12 Mechanic Cl- I 520
13 Operator Air compressor / DG set 520
14 Operator Batching plant 570
15 Operator Bus/Ambulance/ Lorry/ Tanker 570
16 Operator Concrete / Asphalt mixer 530
17 Operator Concrete / Asphalt paver 530
18 Operator Concrete pump / Placer/ ice plant 530
19 Operator Core drilling machine 570
20 Operator Crane/ Tower crane/ Cable way 570
21 Operator Drilling jumbo / Loco / Winch 520
22 Operator Grouting/ Guniting/ Shotcreting 520
23 Operator Jackhammer/Pneumatic tamper 520
24 Operator Pump / Ventilation fan 520
25 Operator Lathe/Drilling/Shearing machine 570
LABOUR RATES
SKILLED CATEGORY:
Page 15 of 483
Part-1 Labour Rates Common SoR 2019-20
SI.
No. Category of Worker
Scheduled Rates for the Year 2019-20
(Rs)
26 Operator Bending / Planing machine 520
27 Operator Road roller 575
28 Operator Shovel / Scraper / Dozer 575
29 Operator Spillway / Sluice gate 530
30 Operator Crusher / Conveyor / Mucker 530
31 Operator Tipper / Dumper / Transit mixer 570
32 Operator Concrete vibrator 530
33 Operator Vibratory plain / padfoot roller 525
34 Operator Wagon drill / Drifter 570
35 Painter Cl- I 570
36 Plumber ( Licensed ) / Pipe fitter 580
37 Sarang / Khalasi 520
38 Spun pipe moulder 525
39 Stone chiseller CI- I / Stone cutter Cl- l 525
40 Struct. steel Fabricator / Marker / Erector 600
41 Welder / Gas Cutter 530
42 Welder (X-ray quality) 570
43 Caulker 570
44 Bore Mechanic 570
45 Plumber Class-I 580
II.
1 Asphalt Sprayer / Boiler attendant 470
2 Bhisti 470
3 Boatman with boat 470
4 Carpenter Cl- II / Erector shuttering 470
5 Cartman with double bullock cart 520
6 Cartman with single bullock cart 470
7 Chavali / Navagani 470
SEMI SKILLED CATEGORY:
Page 16 of 483
Part-1 Labour Rates Common SoR 2019-20
SI.
No. Category of Worker
Scheduled Rates for the Year 2019-20
(Rs)
8 Crowbarman / Jumperman 470
9 Fitter Cl- II 470
10 Gangman / Head / Survey mazdoor 470
11 Gardener / Trained mali 470
12 Helper Air compressor / DG set 470
13 Helper Batching plant 470
14 Helper Blasting 470
15 Helper Bus/ Ambulance/ Lorry/ Tanker 470
16 Helper Bending/Shearing/Planing machine 470
17 Helper Carpenter 470
18 Helper Concrete / Asphalt mixer 470
19 Helper Concrete / Asphalt paver 470
20 Helper Core drilling machine 470
21 Helper Crane/ Tower crane/ Cable way 470
22 Helper Drilling jumbo / Loco / Winch 470
23 Helper Fitter / Fabrication 470
24 Helper Grouting/ Guniting/ Shotcreting 470
25 Helper Jack hammer / Pneumatic tamper 470
26 Helper Laboratory / Instrumentation 470
27 Helper Road roller 470
28 Helper Shovel / Scraper / Dozer 470
29 Helper Crusher / Conveyor / Mucker 470
30 Helper Tipper / Dumper/ Transit mixer 470
31 Helper Vibrator 470
32 Helper Vibratory plain/ padfoot roller 470
33 Helper Wagon drill/ Drifter 470
34 Lineman Electric / Telephone 470
35 Mason Cl- ll / Brick layer Cl-II 470
Page 17 of 483
Part-1 Labour Rates Common SoR 2019-20
SI.
No. Category of Worker
Scheduled Rates for the Year 2019-20
(Rs)
36 Mechanic Cl- II 470
37 Painter Cl- II 470
38 Patkari / Neeraganti / Sowdy 470
39 Stone Chiseller Cl- II 470
40 Stone breaker / Hammerman 470
41 Valveman / Canal sluice operator 470
42 Plumber Class-II 470
43 Sewer Cleaner 470
III.
1 Cement / Asphalt handling mazdoor 445
2 Civic worker 445
3 Heavy mazdoor 445
4 Light mazdoor 445
5 Watchman 445
IV.
1 Care-taker / conductor / Lift attender 470
2 Cook / Messman 470
3 Dhobi 470
4 Diploma Engineer / Surveyor 850
5 Diver with headgear 570
6 Graduate / Laboratory Assistant 590
7 Graduate Engineer/ Geologist 1075
8 Horticulture Assistant / Photographer 520
9 ITI certificate holder / Tracer / Printer 600
10 Literate mazdoor 445
11 Stenographer / Computer Operator 625
12 Telephone / Wireless Operator 580
13 Typist/Job Typist 580
UN-SKILLED CATEGORY:
OTHER CATEGORY:
Page 18 of 483
Part-1 Labour Rates Common SoR 2019-20
SI.
No. Category of Worker
Scheduled Rates for the Year 2019-20
(Rs) 14 CAD operator with diploma in
Engineering/General degree with CAD Certificate 850
15 Jeep Driver 550
16 Data Processing Operator 750
17
Laboratory Chemist with M.Sc/B.sc Chemistry having Computer Knowledge./ Laboratory Microbiologist with M.Sc / B.Sc Microbiology
or B.Sc with BZC having Computer Knowledge. 850
Note:-
1)The wage should not be less than the minimum wages of schedule of employment,subject to out turn.
2)25%extra over the corresponding labour rates in respect of the work to be done during night timesubject to issue of certificate accordingly by the concerned estimate sanctioning authority for providing in the data and by concerned Executive Engineer in charge of the work for
payment.The night time allowance is applicable only to the works done under Greater Hyderabad Municipal Corporation and Greater Warangal Muncipal Corporation limits only.
Page 19 of 483
