1737
Bulletin of Materials Science
Volume 37, January–December 2014 SUBJECT INDEX
γ ′ precipitates coarsening
Analysis of Ostwald ripening in Ni-rich Ni–Ti alloys by
diffusion couples 823
α-Al2O3
Effect of fluoride additives on production and characteriza- tion of nano-α-Al2O3 particles 1709 α-Fe
Iron–carbon hybrid capacitor: A proof-of-concept study 1515 (Fe, Cu)-doped ZnO
Study of Cu-doping effects on magnetic properties of Fe-doped ZnO by first principle calculations 805 α-FeOOH
Synthesis and influence of alkaline concentration on α-
FeOOH nanorods shapes 761
γ-irradiation
Influence of MWCNTs and gamma irradiation on thermal characteristics of medical grade UHMWPE 347 1,4-Dihydropyridines
Synthesis and characterization of TiO2–SiO2 nanoparticles as catalyst for dehydrogenation of 1,4-dihydropyridines 1 1-Methyl-3-butylimidazolium bromide
Ionic liquid modified carbon paste electrode and investiga- tion of its electrocatalytic activity to hydrogen peroxide 617 2D Layered materials
Laser-induced transformation of GaS and GaSe nanosheets to onion structures with closed cages 1383 316L SS
In vitro corrosion investigations of plasma-sprayed hydroxy- apatite and hydroxyapatite–calcium phosphate coatings on
316L SS 1519
316LVM
Promising in vitro performances of nickel-free nitrogen containing stainless steels for orthopaedic applications 1321 3-Point bend test
Processing and properties of Cu based micro- and nano-
composites 227 4-Nitrobenzoic acid
Facile synthesis and catalytic properties of silver colloidal nanoparticles stabilized by SDBS 797 A.c. conductivity
A.c. and d.c. conduction processes in octakis[(4-tert- butylbenzylthio)-porphyrazinato]Cu(II) thin films with gold
electrodes 461 A.c. conductivity and dielectric study of LiNiPO4 synthesized
by solid-state method 473
Effect of temperature on the AC impedance of protein and
carbohydrate biopolymers 1575
A.c.-impedance
Structural, electrical and electrochemical behaviours of LiNi0⋅4M0⋅1Mn1⋅5O4 (M = Al, Bi) as cathode material for
Li-ion batteries 705
Effect of temperature on the AC impedance of protein and
carbohydrate biopolymers 1575
Ab-initio calculation
High temperature magnetic properties of nanocrystalline
Sn0⋅95Co0⋅05O2 563
Absorption spectra
Optical properties on thermally evaporated and heat-treated disodium phthalocyanine derivative thin films 991 Absorption/desorption kinetics
CO impurities effect on LaNi4⋅7Al0⋅3 hydrogen storage alloy hydrogenation/dehydrogenation properties 837 Acrylamide/maleic acid
Novel composite sorbent AAm/MA hydrogels containing starch and kaolin for water sorption and dye uptake 1637 Activation energy
Study of electrical properties of polyvinylpyrrolidone/
polyacrylamide blend thin films 273 Higher d.c. resistivity of Li–Zn–Cd ferrites prepared by micro-
wave sintering compared with conventional sintering 1227 Adenine
A novel organic–inorganic hybrid based on Anderson-type polyoxometalate: H(C5N5H5)2(C5N5H6)2[Al(OH6)Mo6O18]⋅
10H2O 1503
Adhesion molecules
Characterization of neutrophil adhesion to different titanium
surfaces 157 Adsorption
Magnetic-supported cucurbituril: A recyclable adsorbent for the removal of humic acid from simulated water 1167 AFM
Self-assembled nanofilm of 1,2-dihydro-3-(octadecylthio) benzotriazine on copper for corrosion protection 185 AFM/SEM
Influence of deposition rate on PL spectrum and surface morpho- logy of ZnO nanolayers deposited on Si (100) substrate 179 Ag2O
Photocatalytic hydrogen generation with Ag-loaded LiNbO3
911 Aggregation kinetics
Influence of chelation ratio of metal alkoxides on aging of PZT 53/47 sol–gel-based precursors 1123 AgInS2
A facile route to synthesis of AgInS2 nanostructures 767 Ag–Ni alloying
Facile synthesis of monodisperse thermally immiscible Ag–Ni alloy nanoparticles at room temperature 1447 Al2O3/ZnO nano thin film
Experiment and prediction on thermal conductivity of Al2O3/ZnO nano thin film interface structure 449 Al2O3-doped zinc oxide
Optimization of AZO films prepared on flexible substrates
1275
Al2O3–TiO2 nanoceramic coatings
Formation and surface characterization of nanostructured Al2O3–TiO2 coatings 1411
Alanine
Electronic structure and first hyperpolarizability of poly(μ2-
L-alanine-μ3-sodium nitrate (I)) crystals 1471 ALD TiO2
ALD TiO2 thin film as dielectric for Al/p-Si Schottky diode
1563 Alkaline electrolyte
Iron–carbon hybrid capacitor: A proof-of-concept study
1515 Alkaline polymer electrolyte fuel cell
3-Methyltrimethylammonium poly(2,6-dimethyl-1,4-pheny- lene oxide) based anion exchange membrane for alkaline polymer electrolyte fuel cells 877 Al-MCM-41
Synthesis and characterization of mesoporous Si-MCM-41 materials and their application as solid acid catalysts in some
esterification reactions 609
Alumina
Processing and characterization of alumina/LAS bioceramics
for dental applications 695
Aluminium oxide
Optimization of nanocrystalline γ-alumina coating for direct spray water-cooling of optical devices 1583 Aluminium-doped zinc oxide
Ultraviolet sensing properties of polyvinyl alcohol-coated aluminium-doped zinc oxide nanorods 295 Aluminosilicates
Processing and characterization of alumina/LAS bioceramics
for dental applications 695
Amino acids
Effect of amino acid-functionalized multi-walled carbon nanotubes on the properties of dopamine-based poly(amide–
imide) composites: An experimental study 1065 Amorphization
Synthesis of Fe–Si–B–Mn-based nanocrystalline magnetic alloys with large coercivity by high energy ball milling 815 Amorphous alloy
Facile synthesis of monodisperse thermally immiscible Ag–Ni alloy nanoparticles at room temperature 1447 Amorphous carbon
Synthesis of Ag-doped hydrogenated carbon thin films by a hybrid PVD-PECVD deposition process 1669 Amorphous carbon nanotubes
Designed synthesis of tunable amorphous carbon nanotubes (a-CNTs) by a novel route and their oxidation resistance
properties 1397 Amorphous materials
Optical properties of zinc–vanadium glasses doped with
samarium trioxide 281
Amorphous semiconductors
Effect of composition on optical properties of GeSe3–Sb2Se3–
ZnSe thin films 1255
Anderson anion
A novel organic–inorganic hybrid based on Anderson-type polyoxometalate: H(C5N5H5)2(C5N5H6)2[Al(OH6)Mo6O18]⋅
10H2O 1503
Anharmonic interactions
Soft mode and acoustic mode ferroelectric properties of deuterated triglycine sulphate crystal 133
Anion exchange membrane
3-Methyltrimethylammonium poly(2,6-dimethyl-1,4-pheny- lene oxide) based anion exchange membrane for alkaline polymer electrolyte fuel cells 877 Anisotropy
Modelling anisotropic water transport in polymer composite reinforced with aligned triangular bars 101 Anode
Improving electrochemical performance of tin-based anodes formed via oblique angle deposition method 1701 Anomalous coarsening
Analysis of Ostwald ripening in Ni-rich Ni–Ti alloys by
diffusion couples 823
Antacid
Study of as-synthesized and calcined hydrocalumites as
possible antacid agents 941
Antibacterial property
Ciprofloxacin conjugated zinc oxide nanoparticle: A camou- flage towards multidrug resistant bacteria 199 Antibacterial
Wash fastness improvement of malachite green-dyed cotton fabrics coated with nanosol composites of silica–titania 1419 APTES molecules
Structural verification and optical characterization of SiO2–
Au–Cu2O nanoparticles 527
Arc discharge
Synthesis of aluminium nanoparticles by arc evaporation of an aluminium cathode surface 871 Architecture
Macro-scale complexity of nano- to micro-scale architecture of olivine crystals through an iodine vapour transport mecha-
nism 239 Array
Microstructural and optical properties of transparent conduc- tive ZnO:Al:Mo films deposited by template-assisted
sol–gel method 519
Ascorbic acid
Silver nanoparticles prepared in presence of ascorbic acid and gelatin, and their electrocatalytic application 1433 Atmospheric chemical vapour deposition
Influence of hydrogen on chemical vapour synthesis of different carbon nanostructures using propane as precursor
and nickel as catalyst 1197
Atmospheric corrosion
Corrosion behaviour of Ni–Co alloy coatings at Kish Island
(marine) atmosphere 713
Atomic force microscopy
Low energy ion beam modification of Cu/Ni/Si(100) surface
1569 Atomic hydrogen
Influence of hydrogen on chemical vapour synthesis of different carbon nanostructures using propane as precursor
and nickel as catalyst 1197
Attrition milling
Effect of mechanical activation on cordierite synthesis through solid-state sintering method 1221 AZO
Comparative study of highly dense aluminium- and gallium- doped zinc oxide transparent conducting sol–gel thin films 1243
AZO film
Structural evolution, electrical and optical properties of AZO films deposited by sputtering ultra-high density target 895
BaBi4Ti4O15
Relaxor behaviour in BaBi4Ti4O15 ceramics fabricated using the powders obtained by mechanochemically assisted synthe-
sis route 1233
Ball milling
X-ray peak broadening analysis of Fe50Ni50 nanocrystalline alloys prepared under different milling times and BPR using size strain plot (SSP) method 1147 Bamboo fibre
Effects of fibre orientation on mechanical properties of hybrid bamboo/glass fibre polymer composites 1059 Band structure
Structural and optoelectronic properties of cubic perovskite
RbPbF3 287
First principles calculations of structural, electronic and thermal properties of lead chalcogenides PbS, PbSe and PbTe
compounds 1159 Barium succinate
Growth, characterization and dielectric property studies of gel grown barium succinate single crystals 491 Basicity
Study of as-synthesized and calcined hydrocalumites as
possible antacid agents 941
BaSO4
Photoluminescence, thermally stimulated luminescence and electron paramagnetic resonance studies of U6+ doped BaSO4
123 BaTiO3 nanoparticles
Characterization, dielectric and electrical behaviour of BaTiO3 nanoparticles prepared via titanium(IV) triethanola- minato isopropoxide and hydrated barium hydroxide 481 Be-doped CdO
Influence of Be doping on the characteristics of CdO/p-Si heterojunction for optoresponse applications 1509 Bending strength
Effect of chemical composition and alumina content on struc- ture and properties of ceramic insulators 321 Benzotriazine
Self-assembled nanofilm of 1,2-dihydro-3-(octadecylthio) benzotriazine on copper for corrosion protection 185 Benzoylated tannin
Synthesis and characterization of bio-based polyurethane from benzoylated cashewnut husk tannins 735 Bi-2223
Influence of preparation conditions on superconducting pro- perties of Bi-2223 thin films 19 Bi2O3
Synthesis and characterization of γ-Bi2O3 based solid electro-
lyte doped with Nb2O5 843
Bi4Ti3O12 (BTO)
A comparative study regarding effects of interfacial ferro- electric Bi4Ti3O12 (BTO) layer on electrical characteristics of
Au/n-Si structures 257
Bioactivity
Bioactive nanocrystalline wollastonite synthesized by sol–gel combustion method by using eggshell waste as calcium
source 207 Influence of mineral phase in mineralization of a biocompo-
site containing chitosan, demineralized bone matrix and bone
ash – in vitro study 729
Bioceramic
Bioactive nanocrystalline wollastonite synthesized by sol–gel combustion method by using eggshell waste as calcium
source 207 Biocomposite
Influence of mineral phase in mineralization of a biocompo- site containing chitosan, demineralized bone matrix and bone
ash – in vitro study 729
Biodegradable film
Conductive biodegradable film of N-octyloxyphenyl-N′-(4-
methylbenzoyl)thiourea 357 Biological stability
Processing and characterization of alumina/LAS bioceramics
for dental applications 695
Biomineralization
Influence of mineral phase in mineralization of a biocompo- site containing chitosan, demineralized bone matrix and bone
ash – in vitro study 729
Study on osteopotential activity of Terminalia arjuna bark extract incorporated bone substitute 1331 Biopolymers
Effect of temperature on the AC impedance of protein and
carbohydrate biopolymers 1575
Biosensor
Ionic liquid modified carbon paste electrode and investigation of its electrocatalytic activity to hydrogen peroxide 617 Bipolar
Bipolar resistive switching behaviours in ZnMn2O4 film deposited on p+-Si substrate by chemical solution deposition
1657 Birefringence
Growth and characterization of propyl-para-hydroxybenzoate
single crystals 1461
Blue shift
Microstructural and optical properties of transparent conduc- tive ZnO:Al:Mo films deposited by template-assisted
sol–gel method 519
Structural verification and optical characterization of SiO2–
Au–Cu2O nanoparticles 527
Bonding characteristics
Excellent bonding behaviour of novel surface-tailored fibre composite rods with cementitious matrix 1013 Bone substitutes
Study on osteopotential activity of Terminalia arjuna bark extract incorporated bone substitute 1331 Borohydride oxidation
New route for synthesis of electrocatalytic Ni(OH)2 modified electrodes – electrooxidation of borohydride as probe reaction
635 Boron doping
Boron-doped MnTe semiconductor-sensitized ZnO solar cells
1477
Box–Behnken design
Optimization of process conditions for the production of TiO2–xNy film by sol–gel process using response surface
methodology 1301 Branching ratio
Effects of thickness on electronic structure of titanium thin
films 41 Breath analysis
CeO2 thin film as a low-temperature formaldehyde sensor in
mixed vapour environment 1293
Brittle ductile transition
Effects of geometry and temperature on mode I interlaminar fracture of filled polypropylene–elastomer nanocomposite
1017 Bulk electrical conductivity
Effect of temperature on the AC impedance of protein and
carbohydrate biopolymers 1575
Bulk metallic glass
Relook on fitting of viscosity with undercooling of glassy
liquids 83
Ca3Co4O9 + δ
High-temperature thermoelectric properties of AgxYyCa2⋅8-
Co4O9 + δ ceramics 963
Cadmium sulfide
Chemical bath deposition of CdS thin films doped with Zn
and Cu 247
Solvothermal growth of single-crystal CdS nanowires 337 Calcination
Study of as-synthesized and calcined hydrocalumites as
possible antacid agents 941
Calcination methods
Effect of calcination methods on electrochemical perform- ance of NiO used as electrode materials for supercapacitor
649 Calcium phosphate (CaP)
In vitro corrosion investigations of plasma-sprayed hydroxy- apatite and hydroxyapatite–calcium phosphate coatings on
316L SS 1519
Camber curvature
Sintering, camber development of layer composites and a new method to eliminate or decrease camber 117 Capping
Green wet chemical route to synthesize capped CdSe quan-
tum dots 15
Synthesis, characterization, photocatalytic and reusability studies of capped ZnS nanoparticles 931 Carbides
Effect of carbides on erosion resistance of 23-8-N steel 315 Carbon fibre
Processing, structure and flexural strength of CNT and carbon fibre reinforced, epoxy-matrix hybrid composite 597 Carbon materials
Low resistance polycrystalline diamond thin films deposited by hot filament chemical vapour deposition 579 Preparation and characterization of hydrophobic platinum-
doped carbon aerogel catalyst for hydrogen isotope separa-
tion 1485 Carbon nanoribbon
Influence of hydrogen on chemical vapour synthesis of different carbon nanostructures using propane as precursor
and nickel as catalyst 1197
Carbon nanotube
A novel method for fabrication of Fe catalyst used for the synthesis of carbon nanotubes 1031 Electrical conductivity of metal–carbon nanotube structures:
Effect of length and doping 1047 Carbon nanotube growth
Influence of hydrogen on chemical vapour synthesis of different carbon nanostructures using propane as precursor
and nickel as catalyst 1197
Carbon paste electrode
Ionic liquid modified carbon paste electrode and investiga- tion of its electrocatalytic activity to hydrogen peroxide 617 Carbon xerogel
Porous graphitic materials obtained from carbonization of organic xerogels doped with transition metal salts 141 Carbon-doped aluminium oxide
Development of a new solid-state absorber material for dye-sensitized solar cell (DSSC) 685 Cashewnut husk
Synthesis and characterization of bio-based polyurethane from benzoylated cashewnut husk tannins 735 Catalyst
NbCl5 and CrCl3 catalysts effect on synthesis and hydrogen storage performance of Mg–Ni–NiO composites 77 Catalytic reduction
Facile synthesis and catalytic properties of silver colloidal nanoparticles stabilized by SDBS 797 CBD method
Effect of copper doping on structural, optical and electrical properties of Cd0⋅8Zn0⋅2S films prepared by chemical bath
deposition 53 Cd–Be oxide
Influence of Be doping on the characteristics of CdO/p-Si heterojunction for optoresponse applications 1509 CdO:Be/Si heterojunction
Influence of Be doping on the characteristics of CdO/p-Si heterojunction for optoresponse applications 1509 CdSe quantum dots
Green wet chemical route to synthesize capped CdSe quan-
tum dots 15
CdTe@CdS nanocrystals
Investigation of electroluminescence properties of CdTe@CdS core-shell nanocrystals (NCs) 9 Cementitious matrix
Excellent bonding behaviour of novel surface-tailored fibre composite rods with cementitious matrix 1013 Ceramics
Structural study of nanosized yttrium-doped CaMnO3
perovskites 407 Synthesis and microwave dielectric properties of Ca substi-
tuted SrLa4Ti4⋅93Zr0⋅07O17 ceramics 679 Improvement in the microwave dielectric properties of
SrCa4Nb4TiO17 ceramics by Ba substitution 1215 Higher d.c. resistivity of Li–Zn–Cd ferrites prepared by micro-
wave sintering compared with conventional sintering 1227
Optical, mechanical and TEM assessment of titania-doped Bi2V1–xTixO5⋅5–δ bismuth vanadate oxides 1647 Ceramic filler
Preparation and characterization of PEG–Mg(CH3COO)2– CeO2 composite polymer electrolytes for battery application
309 Conductivity study of PEO–LiClO4 polymer electrolyte
doped with ZnO nanocomposite ceramic filler 1403 Ceramic target
Structural evolution, electrical and optical properties of AZO films deposited by sputtering ultra-high density target 895 Cerium oxide
CeO2 thin film as a low-temperature formaldehyde sensor in
mixed vapour environment 1293
Chalcogenide
Synthesis and characterization of PbTe micro/nanostructures through hydrothermal method by using a novel capping agent
753 A facile route to synthesis of AgInS2 nanostructures 767
Chalcogenide glasses
Effect of composition on optical properties of GeSe3–Sb2Se3–
ZnSe thin films 1255
Characterization
Study of as-synthesized and calcined hydrocalumites as
possible antacid agents 941
Charge/discharge
Structural, electrical and electrochemical behaviours of LiNi0⋅4M0⋅1Mn1⋅5O4 (M = Al, Bi) as cathode material for
Li-ion batteries 705
Chelating agent
Influence of chelation ratio of metal alkoxides on aging of PZT 53/47 sol–gel-based precursors 1123 Chemical bath deposition
Green wet chemical route to synthesize capped CdSe quan-
tum dots 15
Bath temperature impact on morphological evolution of Ni(OH)2 thin films and their supercapacitive behaviour 27 Chemical bath deposition of CdS thin films doped with Zn
and Cu 247
Optical and electrical properties of nickel xanthate thin films
553 Chemical conjugation
Ciprofloxacin conjugated zinc oxide nanoparticle: A camou- flage towards multidrug resistant bacteria 199 Chemical reduction
Facile synthesis of monodisperse thermally immiscible Ag–Ni alloy nanoparticles at room temperature 1447 Chemical solution deposition
Bipolar resistive switching behaviours in ZnMn2O4 film deposited on p+-Si substrate by chemical solution deposition
1657 Chemical synthesis
Designed synthesis of tunable amorphous carbon nanotubes (a-CNTs) by a novel route and their oxidation resistance
properties 1397 Chemical vapour deposition
Low resistance polycrystalline diamond thin films deposited by hot filament chemical vapour deposition 579 A novel method for fabrication of Fe catalyst used for the synthesis of carbon nanotubes 1031
InxGa1–xN fibres grown on Au/SiO2 by chemical vapour
deposition 1597 Chemically modified electrodes
New route for synthesis of electrocatalytic Ni(OH)2 modified electrodes – electrooxidation of borohydride as probe reac-
tion 635 Chemiresistive
CeO2 thin film as a low-temperature formaldehyde sensor in
mixed vapour environment 1293
Chitosan
Influence of mineral phase in mineralization of a biocompo- site containing chitosan, demineralized bone matrix and bone
ash – in vitro study 729
Chrono-amperometry
Nanoporous Ag template from partially sintered Ag–Zn compact by dezincification 1353 Ciprofloxacin
Ciprofloxacin conjugated zinc oxide nanoparticle: A camou- flage towards multidrug resistant bacteria 199 CMC
Characterization of gamma irradiated plasticized carboxy- methyl cellulose (CMC)/gum arabic (GA) polymer blends as
absorbents for dyestuffs 603
CNT
Rapid mixing chemical oxidative polymerization: an easy route to prepare PANI coated small-diameter CNTs/PANI nanofibres composite thin film 585 Processing, structure and flexural strength of CNT and
carbon fibre reinforced, epoxy-matrix hybrid composite 597 CO impurities gas
CO impurities effect on LaNi4⋅7Al0⋅3 hydrogen storage alloy hydrogenation/dehydrogenation properties 837 Co3O4
Non-enzymatic hydrogen peroxide sensor based on Co3O4
nanocubes 1369 Coating
Influence of hydrophobic characteristic of organo-modified precursor on wettability of silica film 107 Microstructure and oxidation performance of a γ–γ′ Pt-
aluminide bond coat on directionally solidified superalloy
CM-247LC 1551 Processing of water-based LiNi1/3Mn1/3Co1/3O2 pastes for
manufacturing lithium ion battery cathodes 1685 Cobaltmonoethanolamine complex
Synthesis, characterization, thermal and electrical properties of composite of polyaniline with cobaltmonoethanolamine
complex 1181 Coble creep mechanism
Optimization of nanocrystalline γ-alumina coating for direct spray water-cooling of optical devices 1583 Colloidal dispersion
Influence of chelation ratio of metal alkoxides on aging of PZT 53/47 sol–gel-based precursors 1123 Colour coordinates
Synthesis, characterization, photoluminescence and thermally stimulated luminescence investigations of orange red- emitting Sm3+-doped ZnAl2O4 phosphor 1205 Complex impedance
A.c. conductivity and dielectric study of LiNiPO4 synthesized
by solid-state method 473
Complex permeability
Effect of iron content on permeability and power loss charac- teristics of Li0⋅35Cd0⋅3Fe2⋅35O4 and Li0⋅35Zn0⋅3Fe2⋅35O4 855 Composite electrolyte
Conductivity study of PEO–LiClO4 polymer electrolyte doped with ZnO nanocomposite ceramic filler 1403 Composite hydrogel
Novel composite sorbent AAm/MA hydrogels containing starch and kaolin for water sorption and dye uptake 1637 Composite materials
Electrochemical behaviour of graphene–poly (3,4- ethylenedioxythiophene) (PEDOT) composite electrodes for supercapacitor applications 61 Composite mixture
Enhanced efficiency and improved photocatalytic activity of 1:1 composite mixture of TiO2 nanoparticles and nanotubes in dye-sensitized solar cell 1489 Composites
Improvement in structural and electrical properties of cuprous oxide-coated multiwalled carbon nanotubes 1427 Composite rods
Excellent bonding behaviour of novel surface-tailored fibre composite rods with cementitious matrix 1013 Compressive strength
Optimization of compressive strength of zirconia based
dental composites 1315
Conductance
Electrical conductivity of metal–carbon nanotube structures:
Effect of length and doping 1047 Conducting polymer
Synthesis and characterization of electroactive novel poly-2-
cynoaniline 1131 Conductivity
Study of electrical properties of polyvinylpyrrolidone/
polyacrylamide blend thin films 273 Cooling methods
Study of magnetocaloric effect in LaFe11⋅5Si1⋅5 alloys pre- pared by different cooling methods 849 Copper
Self-assembled nanofilm of 1,2-dihydro-3-(octadecylthio) benzotriazine on copper for corrosion protection 185 Effect of treatment time on characterization and properties of nanocrystalline surface layer in copper induced by surface mechanical attrition treatment 1087 Co-precipitation
Size-dependent magnetic properties in Cu0⋅25Co0⋅25Zn0⋅5Fe2O4 953 Co-precipitation method
Distinction between SnO2 nanoparticles synthesized using co-precipitation and solvothermal methods for the photo- voltaic efficiency of dye-sensitized solar cells 903 Cordierite
Effect of mechanical activation on cordierite synthesis through solid-state sintering method 1221 Correlated barrier hopping
A.c. and d.c. conduction processes in octakis[(4-tert-butyl- benzylthio)-porphyrazinato]Cu(II) thin films with gold
electrodes 461 Corrosion resistance
Electrodeposition and characterization of Ni–W/ZrO2 nano-
composite coatings 1053
Effect of ethyl vanillin on ZnNi alloy electrodeposition and
its properties 1137
Corrosion
Porous copper template from partially spark plasma-sintered Cu–Zn aggregate via dezincification 743 In vitro corrosion investigations of plasma-sprayed hydroxy- apatite and hydroxyapatite–calcium phosphate coatings on
316L SS 1519
Corrosion studies
Formation and surface characterization of nanostructured Al2O3–TiO2 coatings 1411 Co-sintering
Sintering, camber development of layer composites and a new method to eliminate or decrease camber 117 Critical current density
Influence of preparation conditions on superconducting pro- perties of Bi-2223 thin films 19 Cryogenic treatment
Effect of tempering after cryogenic treatment of tungsten carbide–cobalt bounded inserts 327 Crystal growth
Studies on bulk growth, structural and microstructural characterization of 4-aminobenzophenone single crystal grown from vertical Bridgman technique 151 Low resistance polycrystalline diamond thin films deposited by hot filament chemical vapour deposition 579 Growth and characterization of propyl-para-hydroxybenzoate
single crystals 1461
Synthesis and photoluminescence property of silicon carbide nanowires thin film by HF-PECVD system 1249 Crystal structure
Structural study of nanosized yttrium-doped CaMnO3
perovskites 407 A novel organic–inorganic hybrid based on Anderson-type
polyoxometalate: H(C5N5H5)2(C5N5H6)2[Al(OH6)Mo6O18]⋅
10H2O 1503
Cu–Al2O3
Processing and properties of Cu based micro- and nano-
composites 227 Cucurbituril
Magnetic-supported cucurbituril: A recyclable adsorbent for the removal of humic acid from simulated water 1167 CuInS2
A new sonochemical method for preparation of different morphologies of CuInS2 nanostructures 1079 CuInSe2
Zn incorporation in CuInSe2: Particle size and strain effects on microstructural and electrical properties 469 One-step electrodeposition process of CuInSe2: Deposition
time effect 1535
Cyclic oxidation
Microstructure and oxidation performance of a γ–γ′ Pt- aluminide bond coat on directionally solidified superalloy
CM-247LC 1551
Cyclic voltammetry
Structural, electrical and electrochemical behaviours of LiNi0⋅4M0⋅1Mn1⋅5O4 (M = Al, Bi) as cathode material for
Li-ion batteries 705
Cytotoxic activity
Methotrexate-loaded biodegradable nanoparticles: prepara- tion, characterization and evaluation of its cytotoxic potential against U-343 MGa human neuronal glioblastoma cells 945 Cytotoxicity
Studies on interfacial interactions of TiO2 nanoparticles with bacterial cells under light and dark conditions 371 D.c. resistivity
Higher d.c. resistivity of Li–Zn–Cd ferrites prepared by microwave sintering compared with conventional sintering
1227 Dark
Studies on interfacial interactions of TiO2 nanoparticles with bacterial cells under light and dark conditions 371 Debye model
First principles calculations of structural, electronic and thermal properties of lead chalcogenides PbS, PbSe and PbTe
compounds 1159 Debye–Waller factor
Effect of particle size and lattice strain on Debye–Waller factors of Fe3C nanoparticles 773 Deformation mechanism
A study on role of nanosized SiO2 on deformation mechanism
of vinyl ester 1677
Dehydrogenation
Synthesis and characterization of TiO2–SiO2 nanoparticles as catalyst for dehydrogenation of 1,4-dihydropyridines 1 Delta-doping
Impurity binding energy for δ-doped quantum well structures
1347 Density functional theory
Electrical conductivity of metal–carbon nanotube structures:
Effect of length and doping 1047 Dental materials
Processing and characterization of alumina/LAS bioceramics
for dental applications 695
Deposition rate
Influence of deposition rate on PL spectrum and surface mor- phology of ZnO nanolayers deposited on Si (100) substrate
179 Deposition time
One-step electrodeposition process of CuInSe2: Deposition
time effect 1535
Depression parameter
Effect of temperature on the AC impedance of protein and
carbohydrate biopolymers 1575
Dezincification
Nanoporous Ag template from partially sintered Ag–Zn com-
pact by dezincification 1353
DFT
Structural and optoelectronic properties of cubic perovskite
RbPbF3 287
First principle calculations for improving desorption tempera- ture in Mg16H32 doped with Ca, Sr and Ba elements 1731
DIBSD
Influence of annealing temperature on ZnO thin films grown by dual ion beam sputtering 983 Dielectric
Dielectric and photo-dielectric properties of TlGaSeS crystals
505 Synthesis of copper–ferrous (CuFe) nanowires via electro-
chemical method and its investigations as a fluid sensor 889 Dielectric constant
Characterization, dielectric and electrical behaviour of BaTiO3 nanoparticles prepared via titanium(IV) triethanola- minato isopropoxide and hydrated barium hydroxide 481 Growth, characterization and dielectric property studies of
gel grown barium succinate single crystals 491 Dielectric loss
Growth, characterization and dielectric property studies of gel grown barium succinate single crystals 491 Dielectric modulus
A.c. conductivity and dielectric study of LiNiPO4 synthesized
by solid-state method 473
Dielectric property
Guest–host interaction in ferroelectric liquid crystal–
nanoparticle composite system 511 Relaxor behaviour in BaBi4Ti4O15 ceramics fabricated using the powders obtained by mechanochemically assisted synthe-
sis route 1233
Dielectric strength
Effect of chemical composition and alumina content on struc- ture and properties of ceramic insulators 321 Differential scanning calorimeter
Non-isothermal crystallization kinetics of polyethylene–clay nanocomposites prepared by high-energy ball milling 1113 Differential scanning calorimetry
Influence of MWCNTs and gamma irradiation on thermal characteristics of medical grade UHMWPE 347 Diffusion couple
Analysis of Ostwald ripening in Ni-rich Ni–Ti alloys by
diffusion couples 823
Diffusion
Modelling anisotropic water transport in polymer composite reinforced with aligned triangular bars 101 On the microstructure and interfacial properties of sputtered nickel thin film on Si (1 0 0) 1265 Dilute magnetic semiconductor
Structural, optical and magnetic properties of cobalt-doped
CdSe nanoparticles 541
Diluted magnetic semiconductors
High temperature magnetic properties of nanocrystalline
Sn0⋅95Co0⋅05O2 563
Study of Cu-doping effects on magnetic properties of Fe-doped ZnO by first principle calculations 805 Dislocations
Studies on bulk growth, structural and microstructural char- acterization of 4-aminobenzophenone single crystal grown from vertical Bridgman technique 151 DLS
Characterization, dielectric and electrical behaviour of BaTiO3 nanoparticles prepared via titanium(IV) triethanola- minato isopropoxide and hydrated barium hydroxide 481
Dopamine
Role of iron oxide impurities in electrocatalysis by multiwall carbon nanotubes: An investigation using a novel magneti- cally modified ITO electrodes 221 Doping
Chemical bath deposition of CdS thin films doped with Zn
and Cu 247
Zn incorporation in CuInSe2: Particle size and strain effects on microstructural and electrical properties 469 DOS
Structural and optoelectronic properties of cubic perovskite
RbPbF3 287
Study of Cu-doping effects on magnetic properties of Fe-doped ZnO by first principle calculations 805 Electronic structure and first hyperpolarizability of
poly(μ2-L-alanine-μ3-sodium nitrate (I)) crystals 1471 DSC
Thermally stimulated discharge conductivity study of zinc
oxide thermoelectrets 1497
DSSC
Development of a new solid-state absorber material for dye- sensitized solar cell (DSSC) 685 Dye adsorption
Novel composite sorbent AAm/MA hydrogels containing starch and kaolin for water sorption and dye uptake 1637 Dye degradation
Synthesis, characterization, photocatalytic and reusability studies of capped ZnS nanoparticles 931 Dye-sensitized solar cells
Distinction between SnO2 nanoparticles synthesized using co- precipitation and solvothermal methods for the photovoltaic efficiency of dye-sensitized solar cells 903 Dynamic light scattering
Influence of chelation ratio of metal alkoxides on aging of PZT 53/47 sol–gel-based precursors 1123 EDAX
Nanoporous Ag template from partially sintered Ag–Zn compact by dezincification 1353 Effective charge
Chemical shift of U L3 edges in different uranium compounds obtained by X-ray absorption spectroscopy with synchrotron
radiation 643 EIS
Promising in vitro performances of nickel-free nitrogen con- taining stainless steels for orthopaedic applications 1321 Elastic properties
Study of rigidity of semiconducting vanadate glasses and its importance in use of coatings 661 Electric modulus
Study of electrical properties of polyvinylpyrrolidone/
polyacrylamide blend thin films 273 Electrical and optical properties
Comparative study of highly dense aluminium- and gallium- doped zinc oxide transparent conducting sol–gel thin films 1243 Electrical conductivity
Synthesis and characterization of thermally oxidized ZnO
films 441
Synthesis and characterization of γ-Bi2O3 based solid electro-
lyte doped with Nb2O5 843
Design, synthesis and physical properties of poly(styrene–
butadiene–styrene)/poly(thiourea-azo-sulfone) blends 917 Synthesis, characterization, thermal and electrical properties of composite of polyaniline with cobaltmonoethanolamine
complex 1181 Electrical properties
Electrical properties of Ba0⋅7Bi0⋅3Fe0⋅9Sn0⋅1O3–BaCo0⋅02II Co0⋅04III
Bi0⋅94O3 thick film thermistors with wide-range adjustable
parameters 263 Improvement in structural and electrical properties of cu-
prous oxide-coated multiwalled carbon nanotubes 1427 ALD TiO2 thin film as dielectric for Al/p-Si Schottky diode
1563 Investigation of diode parameters using I–V and C–V charac-
teristics of Al/maleic anhydride (MA)/p–Si structure 1717 Electrical resistivity
Low resistance polycrystalline diamond thin films deposited by hot filament chemical vapour deposition 579 Electrical impedance spectroscopy measurements to estimate the uniaxial compressive strength of a fault breccia 1543 Electrocatalysis
Manganese–Schiff base complex immobilized silica materials for electrocatalytic oxygen reduction 623 New route for synthesis of electrocatalytic Ni(OH)2 modified electrodes – electrooxidation of borohydride as probe reac-
tion 635 Electrochemical
Ultraviolet sensing properties of polyvinyl alcohol-coated aluminium-doped zinc oxide nanorods 295 Electrochemical cell
Preparation and characterization of PEG–Mg(CH3COO)2– CeO2 composite polymer electrolytes for battery application
309 Electrochemical deposition
Synthesis of copper–ferrous (CuFe) nanowires via electro- chemical method and its investigations as a fluid sensor 889 Electrochemical performance
Effect of calcination methods on electrochemical perform- ance of NiO used as electrode materials for supercapacitor
649 Electrochemical polymerization
Effect of electrolytes on electrochromic properties and morphology of poly(2,5-dimethoxy aniline) films 975 Electrochemical properties
Electrochemical behaviour of graphene–poly (3,4-ethylene- dioxythiophene) (PEDOT) composite electrodes for super-
capacitor applications 61
Processing of water-based LiNi1/3Mn1/3Co1/3O2 pastes for manufacturing lithium ion battery cathodes 1685 Electrochemical reduction
Influence of temperature and voltage on electrochemical reduction of graphene oxide 629 Electrochemical techniques
Electrochemical behaviour of graphene–poly (3,4- ethylenedioxythiophene) (PEDOT) composite electrodes for supercapacitor applications 61
Electrochromic polymer
Effect of electrolytes on electrochromic properties and morphology of poly(2,5-dimethoxy aniline) films 975 Electrode materials
Effect of calcination methods on electrochemical perform- ance of NiO used as electrode materials for supercapacitor
649 Electrodeposition
Electrodeposition and characterization of Ni–W/ZrO2 nano-
composite coatings 1053
Effect of ethyl vanillin on ZnNi alloy electrodeposition and
its properties 1137
One-step electrodeposition process of CuInSe2: Deposition
time effect 1535
Electroless copper plating
Study of electroless copper plating on ABS resin surface modi- fied by heterocyclic organosilane self-assembled film 71 Electroluminescence
Investigation of electroluminescence properties of CdTe@CdS core-shell nanocrystals (NCs) 9 Electron drift velocity
Electric-field dependence of the electron mobility in bulk
wurtzite ZnO 1603
Electron escape depth
Effects of thickness on electronic structure of titanium thin
films 41 Electron–electron interaction
Spin fluctuation and small polaron conduction dominated electrical resistivity in La0⋅875Sr0⋅125MnO3 manganite nano-
structures 1095 Electronic conductivity
Conductive biodegradable film of N-octyloxyphenyl-N′-
(4-methylbenzoyl)thiourea 357 Electronic structure
Electronic structure and first hyperpolarizability of poly(μ2-L-alanine-μ3-sodium nitrate (I)) crystals 1471 Electronic structure calculations
First principle calculations for improving desorption tempera- ture in Mg16H32 doped with Ca, Sr and Ba elements 1731 Electron–phonon interaction
Spin fluctuation and small polaron conduction dominated electrical resistivity in La0⋅875Sr0⋅125MnO3 manganite nano-
structures 1095 Electro-optical property
Guest–host interaction in ferroelectric liquid crystal–
nanoparticle composite system 511 Electro-osmotic flow
Electrophoretic deposition of titania nanoparticles: Wet density of deposits during EPD 1039 Electrophoretic deposition (EPD)
Electrophoretic deposition of titania nanoparticles: Wet density of deposits during EPD 1039 A simple and efficient electrochemical reductive method for
graphene oxide 1529
Elements doping
Thermoelectric properties of rare earth-doped n-type Bi2Se0⋅3Te2⋅7 nanocomposites 1007 Emission
Photoluminescent properties of Sr2CeO4:Eu3+ and Sr2CeO4: Eu2+ phosphors suitable for near ultraviolet excitation 1191
Emulsifier-free
Parametric characterizations in superparamagnetic latex 389 Emulsion polymerization
Parametric characterizations in superparamagnetic latex 389 Synthesis of polyanthranilic acid–Au nanocomposites by
emulsion polymerization: development of dopamine sensor
1389 Energy bandgap
Optical properties of zinc–vanadium glasses doped with
samarium trioxide 281
Energy shift
Chemical shift of U L3 edges in different uranium compounds obtained by X-ray absorption spectroscopy with synchrotron
radiation 643 Epoxy composites
Processing, structure and flexural strength of CNT and carbon fibre reinforced, epoxy-matrix hybrid composite 597 EPR
Photoluminescence, thermally stimulated luminescence and electron paramagnetic resonance studies of U6+ doped BaSO4
123 EQCN
Self-assembled nanofilm of 1,2-dihydro-3-(octadecylthio)- benzotriazine on copper for corrosion protection 185 Erosion testing
Effect of carbides on erosion resistance of 23-8-N steel 315 Esterification
Synthesis and characterization of mesoporous Si-MCM-41 materials and their application as solid acid catalysts in some
esterification reactions 609
Ethyl vanillin
Effect of ethyl vanillin on ZnNi alloy electrodeposition and
its properties 1137
Evolution
Structural evolution, electrical and optical properties of AZO films deposited by sputtering ultra-high density target 895 EXAFS
Chemical shift of U L3 edges in different uranium compounds obtained by X-ray absorption spectroscopy with synchrotron
radiation 643 Exchange interaction
Magnetization reversal and ferrimagnetism in Pr1–xNdxMnO3
809
Excitation
Photoluminescent properties of Sr2CeO4:Eu3+ and Sr2CeO4: Eu2+ phosphors suitable for near ultraviolet excitation 1191 Fault breccia
Electrical impedance spectroscopy measurements to estimate the uniaxial compressive strength of a fault breccia 1543 Fayalite
Macro-scale complexity of nano- to micro-scale architecture of olivine crystals through an iodine vapour transport mecha-
nism 239 Fe3O4
Iron–carbon hybrid capacitor: A proof-of-concept study 1515 Fe–Ni
X-ray peak broadening analysis of Fe50Ni50 nanocrystalline alloys prepared under different milling times and BPR using size strain plot (SSP) method 1147
Ferroelectric properties
Pr and Gd co-doped bismuth ferrite thin films with enhanced
multiferroic properties 1725
Ferroelectricity
Guest–host interaction in ferroelectric liquid crystal–
nanoparticle composite system 511 Ferromagnetic
High temperature magnetic properties of nanocrystalline
Sn0⋅95Co0⋅05O2 563
Ferromagnetism
Structural, optical and magnetic properties of cobalt-doped
CdSe nanoparticles 541
Few-layer GaS and GaSe
Laser-induced transformation of GaS and GaSe nanosheets to onion structures with closed cages 1383 Field effect transistor
High mobility polymer gated organic field effect transistor
using zinc phthalocyanine 95
Filler
Optimization of compressive strength of zirconia based
dental composites 1315
Finite element analysis
Modelling anisotropic water transport in polymer composite reinforced with aligned triangular bars 101 Finite-size scaling
Size-dependent magnetic properties in Cu0⋅25Co0⋅25Zn0⋅5Fe2O4
953 First principle calculations
First principle calculations for improving desorption tempera- ture in Mg16H32 doped with Ca, Sr and Ba elements 1731 Flexible substrates
Optimization of AZO films prepared on flexible substrates
1275 Flexural strength
Processing, structure and flexural strength of CNT and carbon fibre reinforced, epoxy-matrix hybrid composite 597 Effects of fibre orientation on mechanical properties of
hybrid bamboo/glass fibre polymer composites 1059 Flow cytometry
Characterization of neutrophil adhesion to different titanium
surfaces 157 Fluorescence spectroscopy
Studies on interfacial interactions of TiO2 nanoparticles with bacterial cells under light and dark conditions 371 Flux density
Effect of iron content on permeability and power loss charac- teristics of Li0⋅35Cd0⋅3Fe2⋅35O4 and Li0⋅35Zn0⋅3Fe2⋅35O4 855 Formaldehyde
CeO2 thin film as a low-temperature formaldehyde sensor in
mixed vapour environment 1293
Formation energy
First principle calculations for improving desorption tempera- ture in Mg16H32 doped with Ca, Sr and Ba elements 1731 Formation mechanism
Formation and surface characterization of nanostructured Al2O3–TiO2 coatings 1411 Forsterite
Macro-scale complexity of nano- to micro-scale architecture of olivine crystals through an iodine vapour transport mecha-
nism 239 FP-LAPW
Structural and optoelectronic properties of cubic perovskite
RbPbF3 287
Fractography
Effects of geometry and temperature on mode I interlaminar fracture of filled polypropylene–elastomer nanocomposite
1017 Fracture toughness
Effects of geometry and temperature on mode I interlaminar fracture of filled polypropylene–elastomer nanocomposite
1017 Fragility
Relook on fitting of viscosity with undercooling of glassy
liquids 83 Friction stir processing
Optimization of process parameters for friction stir process- ing (FSP) of Al–TiC in situ composite 571 FTIR analysis
Synthesis of Ag-doped hydrogenated carbon thin films by a hybrid PVD-PECVD deposition process 1669 FT–IR
Studies on interfacial interactions of TiO2 nanoparticles with bacterial cells under light and dark conditions 371 FT–Raman
Studies on interfacial interactions of TiO2 nanoparticles with bacterial cells under light and dark conditions 371 Functional coating
Wash fastness improvement of malachite green-dyed cotton fabrics coated with nanosol composites of silica–titania 1419 Fused silica
Effect of Au/SiO2 substrate on the structural and optical properties of gallium nitride grown by CVD 1625
GA
Characterization of gamma irradiated plasticized carboxy- methyl cellulose (CMC)/gum arabic (GA) polymer blends as
absorbents for dyestuffs 603
Gadolinium oxide
Rapid hydrothermal route to synthesize cubic-phase gadolin-
ium oxide nanorods 789
Gallium nitride
Effect of Au/SiO2 substrate on the structural and optical properties of gallium nitride grown by CVD 1625 Gamma radiation
Characterization of gamma irradiated plasticized carboxy- methyl cellulose (CMC)/gum arabic (GA) polymer blends as
absorbents for dyestuffs 603
Gamma ray attenuation coefficient
Determination of gamma ray attenuation coefficients of Al–4% Cu/B4C metal matrix composites at 662, 1173 and
1332 keV 1175
Gamma spectrometer
Determination of gamma ray attenuation coefficients of Al–4% Cu/B4C metal matrix composites at 662, 1173 and
1332 keV 1175
Gas sensitivity
Synthesis and characterization of thermally oxidized ZnO
films 441
Gel growth
Growth, characterization and dielectric property studies of gel grown barium succinate single crystals 491 Gelatin
Silver nanoparticles prepared in presence of ascorbic acid and gelatin, and their electrocatalytic application 1433 Giant onions and Raman scattering
Laser-induced transformation of GaS and GaSe nanosheets to onion structures with closed cages 1383 Glass forming ability
Relook on fitting of viscosity with undercooling of glassy
liquids 83 Glass ionomer cement
One-pot synthesis of hydroxyapatite–silica nanopowder com- posite for hardness enhancement of glass ionomer cement
(GIC) 213 Gold layer
Effect of Au/SiO2 substrate on the structural and optical properties of gallium nitride grown by CVD 1625 Grain growth
Nanoscale grain growth behaviour of CoAl intermetallic synthesized by mechanical alloying 383 Grain growth kinetics of textured-BaTiO3 ceramics 779 Grain refinement
Optimization of process parameters for friction stir process- ing (FSP) of Al–TiC in situ composite 571 Grain size
Low resistance polycrystalline diamond thin films deposited by hot filament chemical vapour deposition 579 Graphene
One-step synthesis of mesoporous silica–graphene compo- sites by simultaneous hydrothermal coupling and reduction of
graphene oxide 589
Graphene oxide
One-step synthesis of mesoporous silica–graphene compo- sites by simultaneous hydrothermal coupling and reduction of
graphene oxide 589
Influence of temperature and voltage on electrochemical reduction of graphene oxide 629 A simple and efficient electrochemical reductive method for
graphene oxide 1529
Graphitization
Porous graphitic materials obtained from carbonization of organic xerogels doped with transition metal salts 141 Green chemistry
Green wet chemical route to synthesize capped CdSe quan-
tum dots 15
Green’s function
Soft mode and acoustic mode ferroelectric properties of deuterated triglycine sulphate crystal 133 Grey relational analysis
Optimization of AZO films prepared on flexible substrates
1275 Growth from solution
Growth, optical, thermal and mechanical characterization of an organic crystal: Brucinium 5-sulfosalicylate trihydrate
1589 GZO
Comparative study of highly dense aluminium- and gallium- doped zinc oxide transparent conducting sol–gel thin films
1243 Halder–Wagner
Facile template-free hydrothermal synthesis and microstrain measurement of ZnO nanorods 397 Hall-Petch model
Optimization of nanocrystalline γ-alumina coating for direct spray water-cooling of optical devices 1583 Hand lay-up technique
Processing, structure and flexural strength of CNT and carbon fibre reinforced, epoxy-matrix hybrid composite 597 Hardness
One-pot synthesis of hydroxyapatite–silica nanopowder composite for hardness enhancement of glass ionomer cement
(GIC) 213 Effect of treatment time on characterization and properties of
nanocrystalline surface layer in copper induced by surface mechanical attrition treatment 1087 Hardness measurement
Microwave synthesis and mechanical characterization of functionally graded material for applications in fusion
devices 1607 Heat treatment
Characterization of composite materials based on Fe powder (core) and phenol–formaldehyde resin (shell) modified with
nanometersized SiO2 167
Heterocyclic organosilane
Study of electroless copper plating on ABS resin surface modified by heterocyclic organosilane self-assembled film
71 Heteropoly acid anchored onto MCM-41
Synthesis and characterization of mesoporous Si-MCM-41 materials and their application as solid acid catalysts in some
esterification reactions 609
High frequency
Zn incorporation in CuInSe2: Particle size and strain effects on microstructural and electrical properties 469 High mobility
High mobility polymer gated organic field effect transistor
using zinc phthalocyanine 95
High pressure
High pressure phase transitions for CdSe 549 High-pressure structural stability of the ductile intermetallic
compound, ErCu 1343
High-resolution X-ray diffraction
Growth and characterization of propyl-para-hydroxybenzoate
single crystals 1461
High-temperature annealing
Study of magnetocaloric effect in LaFe11⋅5Si1⋅5 alloys pre- pared by different cooling methods 849 HNS
Promising in vitro performances of nickel-free nitrogen con- taining stainless steels for orthopaedic applications 1321 Homogeneous quaternization
3-Methyltrimethylammonium poly(2,6-dimethyl-1,4-pheny- lene oxide) based anion exchange membrane for alkaline polymer electrolyte fuel cells 877 Horseradish peroxidase
Ionic liquid modified carbon paste electrode and investiga- tion of its electrocatalytic activity to hydrogen peroxide 617 Humic acid
Magnetic-supported cucurbituril: A recyclable adsorbent for the removal of humic acid from simulated water 1167
Hybrid capacitor
Iron–carbon hybrid capacitor: A proof-of-concept study 1515 Hybrid deposition
Synthesis of Ag-doped hydrogenated carbon thin films by a hybrid PVD-PECVD deposition process 1669 Hybrid materials
Interfacially synthesized PAni–PMo12 hybrid material for supercapacitor applications 861 Hydrocalumite
Study of as-synthesized and calcined hydrocalumites as
possible antacid agents 941
Hydrogen absorbing materials
Comparison of hydrogen storage properties of pure Mg and
milled pure Mg 831
Hydrogen evolution
Photocatalytic hydrogen generation with Ag-loaded LiNbO3
911 Hydrogen gas response
Nanocrystalline Pt-doped TiO2 thin films prepared by spray pyrolysis for hydrogen gas detection 425 Hydrogen isotope exchange
Preparation and characterization of hydrophobic platinum- doped carbon aerogel catalyst for hydrogen isotope separa-
tion 1485 Hydrogen peroxide
Role of iron oxide impurities in electrocatalysis by multiwall carbon nanotubes: An investigation using a novel magneti- cally modified ITO electrodes 221 Non-enzymatic hydrogen peroxide sensor based on Co3O4
nanocubes 1369 Silver nanoparticles prepared in presence of ascorbic acid and
gelatin, and their electrocatalytic application 1433 Hydrogen purification
CO impurities effect on LaNi4⋅7Al0⋅3 hydrogen storage alloy hydrogenation/dehydrogenation properties 837 Hydrogen storage
NbCl5 and CrCl3 catalysts effect on synthesis and hydrogen storage performance of Mg–Ni–NiO composites 77 Hydrogen storage capacity
First principle calculations for improving desorption tempera- ture in Mg16H32 doped with Ca, Sr and Ba elements 1731 Hydrogen storage materials
Hydrogen absorption/desorption characteristics of room temperature ZrMn2–xNix system (x = 1⋅25–1⋅50) 655 Hydrogen storage performance
NbCl5 and CrCl3 catalysts effect on synthesis and hydrogen storage performance of Mg–Ni–NiO composites 77 Hydrogenated DLC
Synthesis of Ag-doped hydrogenated carbon thin films by a hybrid PVD-PECVD deposition process 1669 Hydrophobic catalyst
Preparation and characterization of hydrophobic platinum- doped carbon aerogel catalyst for hydrogen isotope separa-
tion 1485 Hydrophobic silica
Influence of hydrophobic characteristic of organo-modified precursor on wettability of silica film 107 Hydrophobic surfaces
Influence of hydrophobic characteristic of organo-modified precursor on wettability of silica film 107
Hydrothermal
Synthesis and characterization of PbTe micro/nanostructures through hydrothermal method by using a novel capping agent
753 Rapid hydrothermal route to synthesize cubic-phase gadolin-
ium oxide nanorods 789
Hydrothermal method
Thermoelectric properties of rare earth-doped n-type Bi2Se0⋅3Te2⋅7 nanocomposites 1007 Hydrothermal process
Facile template-free hydrothermal synthesis and microstrain measurement of ZnO nanorods 397 Hydrothermal reduction
One-step synthesis of mesoporous silica–graphene compos- ites by simultaneous hydrothermal coupling and reduction of
graphene oxide 589
Hydroxyapatite
Bioactive nanocrystalline wollastonite synthesized by sol–gel combustion method by using eggshell waste as calcium
source 207 In vitro corrosion investigations of plasma-sprayed hydroxy-
apatite and hydroxyapatite–calcium phosphate coatings on
316L SS 1519
Hydroxyapatite–silica nanopowder
One-pot synthesis of hydroxyapatite–silica nanopowder composite for hardness enhancement of glass ionomer cement
(GIC) 213 Hypereutectic Al–Si alloy
Microstructural evolution and mechanical properties of hypereutectic Al–Si alloy processed by liquid die forging
1153 Hyperpolarizability
Electronic structure and first hyperpolarizability of poly(μ2-L-alanine-μ3-sodium nitrate (I)) crystals 1471
Ideality factor
Investigation of diode parameters using I–V and C–V charac- teristics of Al/maleic anhydride (MA)/p-Si structure 1717 Immobilization
Preparation and characterization of monosubstituted por- phyrins immobilized on nanosilica 1101 Impedance
Self-assembled nanofilm of 1,2-dihydro-3-(octadecylthio) benzotriazine on copper for corrosion protection 185 Impedance spectroscopy
Electrical properties of Ba0⋅7Bi0⋅3Fe0⋅9Sn0⋅1O3–BaCo0⋅02II Co0⋅04III
Bi0⋅94O3 thick film thermistors with wide-range adjustable
parameters 263 Conductivity study of PEO–LiClO4 polymer electrolyte
doped with ZnO nanocomposite ceramic filler 1403 Implants
Promising in vitro performances of nickel-free nitrogen containing stainless steels for orthopaedic applications 1321 Impregnation
Preparation and characterization of Fe–V/TiO2–SiO2 nano- catalyst modified by zinc 1375 Impurity binding energy
Impurity binding energy for δ-doped quantum well structures
1347
In situ annealing
Influence of annealing temperature on ZnO thin films grown by dual ion beam sputtering 983 In situ composites
Optimization of process parameters for friction stir process- ing (FSP) of Al–TiC in situ composite 571 In situ polymerization
Synthesis of polyanthranilic acid–Au nanocomposites by emulsion polymerization: development of dopamine sensor
1389 Indentation toughness
Processing and characterization of alumina/LAS bioceramics
for dental applications 695
Indium–gallium nitride
InxGa1–xN fibres grown on Au/SiO2 by chemical vapour
deposition 1597 Inflammatory response
Characterization of neutrophil adhesion to different titanium
surfaces 157 Interfaces
Investigation of diode parameters using I–V and C–V charac- teristics of Al/maleic anhydride (MA)/p-Si structure 1717 Interface state density
ALD TiO2 thin film as dielectric for Al/p-Si Schottky diode
1563 Interface states
A comparative study regarding effects of interfacial ferro- electric Bi4Ti3O12 (BTO) layer on electrical characteristics of
Au/n-Si structures 257
Interface structure
Experiment and prediction on thermal conductivity of Al2O3/ZnO nano thin film interface structure 449 Interfacial polymerization
Interfacially synthesized PAni–PMo12 hybrid material for supercapacitor applications 861 Intermetallic compounds
Nanoscale grain growth behaviour of CoAl intermetallic synthesized by mechanical alloying 383 Intermetallics
High-pressure structural stability of the ductile intermetallic
compound, ErCu 1343
Iodine vapour transport
Macro-scale complexity of nano- to micro-scale architecture of olivine crystals through an iodine vapour transport mecha-
nism 239 Ion beam sputtering
Low energy ion beam modification of Cu/Ni/Si(100) surface
1569 Ion exchange capacity
Enhancement of proton conductivity of sulfonated polysty- rene membrane prepared by plasma polymerization process
1613 Ionic conductivity
Conductivity study of PEO–LiClO4 polymer electrolyte doped with ZnO nanocomposite ceramic filler 1403 Ionic liquid
Ionic liquid modified carbon paste electrode and investiga- tion of its electrocatalytic activity to hydrogen peroxide 617 Iron catalyst
A novel method for fabrication of Fe catalyst used for the synthesis of carbon nanotubes 1031
Iron oxide nanoparticles
Role of iron oxide impurities in electrocatalysis by multiwall carbon nanotubes: An investigation using a novel magneti- cally modified ITO electrodes 221 Isothermal annealing
Nanoscale grain growth behaviour of CoAl intermetallic synthesized by mechanical alloying 383 IT-SOFC
Synthesis and characterization of γ-Bi2O3 based solid electro-
lyte doped with Nb2O5 843
Kaolin
Novel composite sorbent AAm/MA hydrogels containing starch and kaolin for water sorption and dye uptake 1637 Kinetics
Study of effect of chromium on titanium dioxide phase trans-
formation 669 Magnetic-supported cucurbituril: A recyclable adsorbent for
the removal of humic acid from simulated water 1167 Kinetic data
Photoluminescence, trap states and thermoluminescence decay process study of Ca2MgSi2O7:Eu2+, Dy3+ phosphor 925 KKR–CPA
High temperature magnetic properties of nanocrystalline
Sn0⋅95Co0⋅05O2 563
LaFe13–xSix alloys
Study of magnetocaloric effect in LaFe11⋅5Si1⋅5 alloys pre- pared by different cooling methods 849 LaNi4⋅7Al0⋅3 hydrogen storage alloy
CO impurities effect on LaNi4⋅7Al0⋅3 hydrogen storage alloy hydrogenation/dehydrogenation properties 837 Large scale
Large-scale synthesis of YSZ nanopowder by Pechini method
969 L-arginine
Synthesis of selenium nanorods with assistance of bio-
molecule 1631 LAS glass-ceramics
Processing and characterization of alumina/LAS bioceramics
for dental applications 695
Laser induced dewetting
Laser-induced transformation of GaS and GaSe nanosheets to onion structures with closed cages 1383 LASN
Electronic structure and first hyperpolarizability of poly(μ2-L-alanine-μ3-sodium nitrate (I)) crystals 1471 Lattice parameters
Effect of particle size and lattice strain on Debye–Waller factors of Fe3C nanoparticles 773 Lattice strain
Effect of particle size and lattice strain on Debye–Waller factors of Fe3C nanoparticles 773 Synthesis of Fe–Si–B–Mn-based nanocrystalline magnetic
alloys with large coercivity by high energy ball milling 815 Layer composites
Sintering, camber development of layer composites and a new method to eliminate or decrease camber 117 Leaching fastness
Wash fastness improvement of malachite green-dyed cotton fabrics coated with nanosol composites of silica–titania 1419