ATTENDANCE SHEET-CUM-MINUTES OF BOARD OF FACULTY
Minutes of the meeting of the Board of Faculty Studies of Arts held on 05.04.16 at 11.00 a.m.
PRESENT
(Name) (Signature)
1. Prof. Ragini Roy (Chairperson) _______P_________
2. Prof. R.N. Mishra (External Expert 1) _______P_________
3. Prof. Rajul Bhargava (External Expert 2) _______P_________
4. Prof. J.K. Verma (Internal Member) _______P_________
5. Prof. Sharmila Saxena (Internal Member) _______P_________
6. Prof. Ravi Sidhu (Internal Member) _______P_________
7. Prof. S.K. Satsangi (Internal Member) _______P_________
8. Prof. Urmila Anand (Internal Member) _______P_________
9. Dr. Madhulika Gautam (Internal Member) _______P_________
10. Prof. A. K.Sharma (Internal Member) _______P_________
11. Dr. Parul Bhatnagar (Internal Member) _______P_________
12. Prof. Gur Pyari Jandial (Internal Member) _______P_________
13. Prof. Renu Joshan (Internal Member) _______P_________
14. Prof. Aditya Prachandia (Internal Member) _______P_________
15. Prof. Sangita Saini (Internal Member) _______P_________
16. Prof. Ravi Kumar Bhatnagar (Internal Member) _______P_________
17. Prof. Lovely Sharma (Internal Member) _______P_________
18. Prof. Sudha Sahgal (Internal Member) _______P_________
19. Prof. Meera Sharma (Internal Member) _______P_________
20. Prof. Giriraj Kumar (Internal Member) ____Absent_______
21. Prof. Agam Kulshrestha (Internal Member) _______P_________
22. Prof. Prabha Sharma (Internal Member) _______P_________
23. Prof. Manju Rani Bhatnagar (Internal Member) _______P_________
24. Prof. Kamlesh K.Ravi (Internal Member) _______P_________
25. Dr. S.P. Kaura (Internal Member) _______P_________
26. Dr. V. Prem Lata (Internal Member) _______P_________
Proposed changes in the existing system
The Committee reviewed the minutes of Board of Studies of Six Departments of the Faculty and approved with minor changes.
The meeting ended with thanks to the chair.
Prof. Ragini Roy (Signature of Chairperson)
Department of Drawing & Painting
Department Of Drawing and Painting Faculty of Arts
(DPW) DRAWING AND PAINTING WORK EXPERIENCE WORK EXPERIENCE COURSE CERTIFICATE AND ADVANCED CERTIFICATE COURSE- COMMERCIAL ART
(2015-2016)
Course No.: DPW101, Course Title: COMMERCIAL ART I
Class: B.A., Status of Course: WORK EXPERIENCE, Approved since session: 2012-2013 Total Credits:2, Periods(55 mts. each)/week:4(L-0+T-0+P/S-3), Min.pds./sem.:39
1) Work 1 -Drawing and Sketching
2) Work 2- Lettering and typography- study of lettering of Roman and Devanagri Scripts 3) Work 3- Symbol or Icons designs for various Environments like School, Institutions, forest, and factory ects.
4) Work 4 -In door sketching work 30 nos.
5) Advertising Theory (not for examination) Advertising (Advertising Art and Ideas-I)
Course No.: DPW201, Course Title: COMMERCIAL ART I
Class: B.A., Status of Course: WORK EXPERIENCE, Approved since session: 2012-2013 Total Credits:2, Periods(55 mts. each)/week:4(L-0+T-0+P/S-3), Min.pds./sem.:39
1) Work 1 - Lettering and typography:-Develop an understanding of the basic terminology of typography and the historical origin of typographical terms and Concepts and its present implications.
2) Work 2- Logo or Monogram- Logo designing of Company and Product.
3) Work 3- Book Cover designing: of any magazine 4) Work 4 –Outdoor door sketching work 30 nos.
5) Advertising Theory (not for examination) Advertising (Advertising Art and Ideas-II) Theory
Course No.: DPW301, Course Title: COMMERCIAL ART I
Class: B.A., Status of Course: WORK EXPERIENCE, Approved since session: 2012-2013 Total Credits:2, Periods(55 mts. each)/week:4(L-0+T-0+P/S-3), Min.pds./sem.:39
1) Work 1 - Publication Design- Press Layout design- Any product of Daily needs- 2) Work 2- Magazine Layout design- Any Product of Daily needs.
3) Work 3- Poster Design- Social/cultural issues
4) Work 4 – Fundamentals of Computers (Designing Skill Developments- Coral Draw (Basic) Photoshop (Basic) Creating Corporate Identity with visiting Cards.
5) Outdoor door sketching
6) Advertising Theory (not for examination) Advertising theory (Advertising and media, theory of Poster, creativity in Advertising)
Course No.: DPW401, Course Title: COMMERCIAL ART I
Class: B.A., Status of Course: WORK EXPERIENCE, Approved since session: 2012-2013 Total Credits:2, Periods(55 mts. each)/week:4(L-0+T-0+P/S-3), Min.pds./sem.:3
1) Work 1 - Hording, Brochures, Show Cards designs.
2) Work 2- Design and illustrations-story, sports, fairs and festivals 3) Work 3- Packaging design
4) Work 4- Exhibition and Display design 5) Outdoor door sketching work 30 nos.
6) Advertising Theory (not for examination)
Advertising theory (Advertising Planning, Campaign Planning) Course No.: DPW501, Course Title: COMMERCIAL ART I
Class: B.A., Status of Course: WORK EXPERIENCE, Approved since session: 2012-2013 Total Credits:2, Periods(55 mts. each)/week:4(L-0+T-0+P/S-3), Min.pds./sem.:39
1) Work 1 - Computer Aided Design (Designing Skill Developments- Coral Draw and Photoshop) - Poster Design
2) Work 2- Advertising Mini Campaign- Social Campaign Product/ commercial Campaign
3) Work 3- Story board and Copy writing
4) Work 4- Indoor and outdoor Sketching.
5) Outdoor door sketching work 30 nos.
6) Advertising Theory (not for examination)
Advertising theory (Advertising and Marketing Research, Printing Process-I) Course No.: DPW601, Course Title: COMMERCIAL ART I
Class: B.A., Status of Course: WORK EXPERIENCE, Approved since session: 2012-2013 Total Credits:2, Periods(55 mts. each)/week:4(L-0+T-0+P/S-3), Min.pds./sem.:39
1) Work 1 - Computer Aided Design and illustrations.
2) Work 2- Computer Graphics- use of Coral draw and Photoshop -a) Logo or Monogram designing.
-b) Invitation Cards, Greeting Cards designing 3) Work 3- C) Product Design
4) Work-4 Indoor and outdoor sketching.
5) Advertising theory (Advertising, Marketing Research, Printing Process-II)
Department Of Drawing and Painting Faculty of Arts
(DPW) DRAWING AND PAINTING WORK EXPERIENCE COURSE CERTIFICATE AND ADVANCED CERTIFICATE COURSE- COMMERCIAL ART
(2015-2016)
1 Department/center proposing the course Department Of Drawing and Painting 2 Course Title: COMMERCIAL ART I (DPW) DRAWING AND PAINTING
WORK EXPERIENCE WORK EXPERIENCE COURSE - CERTIFICATE AND ADVANCED CERTIFICATE COURSE-
COMMERCIAL ART
3 L-T-P 18
4 Credits 2
5 Course number (DPW-101,201,301,401,501,601)
6 Status (category for program) WORK EXPERIENCE COURSE 7 Overlap with any UG/PG course of
Department/centre
No
8 Overlap with any UG/PG course of another Department /centre
No
9 Frequency of offering Four in a week
10 Faculty who will teach the course Dr Meenakshi Thakur 11 Will the course require visiting faculty No
12 Course objective (about 50 words) indicating motivation and aims
Advanced Certificate Course of Commercial Art Curriculum focus of making students to build a strong foundation for a graphic design Career by Learning design technique, visual thinking, Concept development, color, composition, typography, drawing, illustration and their implications through both by hand on exercise, and by using computer graphic design programs that will make student self sufficient and it will enable them to get job according to the opportunities available as per need of artistic ambivalence.
Department of Drawing & Painting
Modular Course Block Printing
MTP-101
1 Department /Center Proposing the Course
Drawing & Painting
2 Course Title INTRODUCTION&FAMILIARIZATION
3 L-T-P L0 T0 P8
4 Credits 4
5 Course Number MTP101
6 Status(Category for
Program) Core Programme
7 Status vis-a –vis other courses (give course Number/title 7.1 Overlap with any UG/PG
Course of the Dept./Centre PGDTDP – TDD104/Ornamentation Techniques-Textile Fabrics– 6 classes only, TDD 203/Design & Printing Technology Lab– 6 classes only
7.2 Overlap with any UG/PG Course of another Dept./Centre
DTD 303/ Printing Technology Lab. – 6 classes
8 Frequency of offering Thrice every Semester 9 Faculty who will teach the
Course Dr. Parul Bhatnagar
10 Will the Course require Visiting Faculty
Yes 11 Course Objectives (about 50
Words) indicating motivation and aims
An Entrepreneur development Programme is being offered according to NCVT & DEI syllabus for students to develop their skills in a vocational area, who come from below poverty line or backward areas.
After taking this Module they can immediately do job work for general public of their areas, and after gaining experience can setup their own small-scale industry.
Department of Drawing and Painting Modular Course
Block Printing MTP102
1 Department /Center
Proposing the Course Drawing & Painting 2 Course Title Design & Visualization
3 L-T-P L0 T0 P8
4 Credits 4
5 Course Number MTP102
6 Status
(Category for Program)
Core Programme
7 Status vis-a –vis other courses (give course Number/title 7.1 Overlap with any UG/PG
Course of the Dept./Centre PGDTDP – TDD104 – 6 classes only, TDD 203 – 12 classes only
7.2 Overlap with any UG/PG Course of another Dept./Centre
PGDTDP – TDD104/Ornamentation Techniques -Textile Fabrics – 6 classes only,
TDD 203/ Design & Printing Technology Lab – 6 classes only
8 Frequency of offering Thrice every Semester 9 Faculty who will teach the
Course Dr. Parul Bhatnagar
10 Will the Course require
Visiting Faculty Yes
11 Course Objectives (about 50 Words) indicating motivation and aims
An Entrepreneur development Programme is being offered according to NCVT & DEI syllabus for students to develop their skills in a vocational area, who come from below poverty line or backward areas.
After taking this Module they can immediately do job work for general public of their areas, and after gaining experience can setup their own small-scale industry.
Department of Drawing and Painting Modular Course
Block Printing MTP103
1 Department /Center
Proposing the Course Drawing & Painting
2 Course Title Value addition with techniques
3 L-T-P L0 T0 P8
4 Credits 4
5 Course Number MTP103
6 Status
(Category for Program)
Core Programme
7 Status vis-a –vis other courses (give course Number/title 7.1 Overlap with any UG/PG
Course of the Dept./Centre PGDTDP – TDD104 – 6 classes only, TDD 203 – 12 classes only
7.2 Overlap with any UG/PG Course of another Dept./Centre
PGDTDP – TDD104/Ornamentation Techniques -Textile Fabrics – 6 classes, TDD 203/ Design & Printing Technology Lab – 6 classes
8 Frequency of offering Thrice every Semester 9 Faculty who will teach the
Course
Dr. Parul Bhatnagar 10 Will the Course require
Visiting Faculty
Yes 11 Course Objectives (about 50
Words) indicating motivation and aims
An Entrepreneur development Programme is being offered according to NCVT & DEI syllabus for students to develop their skills in a vocational area, who come from below poverty line or backward areas.
After taking this Module they can immediately do job work for general public of their areas, and after gaining experience can setup their own small-scale industry.
Department of Drawing and Painting Modular Course
Tie & Dye MTP201
1 Department /Center
Proposing the Course Drawing & Painting
2 Course Title Tie & Dye An INTRODUCTION
3 L-T-P L0 T0 P8
4 Credits 4
5 Course Number MTP201
6 Status(Category for Program)
Core Programme
7 Status vis-a –vis other courses (give course Number/title 7.1 Overlap with any UG/PG
Course of the Dept./Centre PGDTDP – TDD104/Ornamentation Techniques-Textile Fabrics – 6 classes only,
TDD 203/ Design & Printing Technology Lab – 6 classes only
7.2 Overlap with any UG/PG Course of another Dept./Centre
DTD 107/Textile Ornamentation techniques I– 6 classes
8 Frequency of offering Thrice every Semester 9 Faculty who will teach the
Course
Dr. Parul Bhatnagar 10 Will the Course require
Visiting Faculty
Yes 11 Course Objectives (about 50
Words) indicating motivation and aims
An Entrepreneur development Programme is being offered according to NCVT & DEI syllabus for students to develop their skills in a vocational area, who come from below poverty line or backward areas.
After taking this Module they can immediately do job work for general public of their areas, and after gaining experience can setup their own small-scale industry.
Department of Drawing and Painting Modular Course
Tie & Dye MTP202
1 Department /Center
Proposing the Course Drawing & Painting 2 Course Title Tie and Dye Techniques I
3 L-T-P L0 T0 P8
4 Credits 4
5 Course Number MTP202
6 Status(Category for Program)
Core Programme
7 Status vis-a –vis other courses (give course Number/title 7.1 Overlap with any UG/PG
Course of the Dept./Centre PGDTDP – TDD104/Ornamentation Techniques-Textile Fabrics – 6 classes only,
TDD 203/ Design & Printing Technology Lab – 6 classes only
7.2 Overlap with any UG/PG Course of another Dept./Centre
DTD 107/Textile Ornamentation techniques I– 6 classes
8 Frequency of offering Thrice every Semester 9 Faculty who will teach the
Course
Dr. Parul Bhatnagar 10 Will the Course require
Visiting Faculty
Yes 11 Course Objectives (about 50
Words) indicating motivation and aims
An Entrepreneur development Programme is being offered according to NCVT & DEI syllabus for students to develop their skills in a vocational area, who come from below poverty line or backward areas.
After taking this Module they can immediately do job work for general public of their areas, and after gaining experience can setup their own small-scale industry.
Department of Drawing and Painting Modular Course
Tie & Dye MTP203
1 Department /Center
Proposing the Course Drawing & Painting
2 Course Title Tie and Dye An Techniques II
3 L-T-P L0 T0 P8
4 Credits 4
5 Course Number MTP203
6 Status(Category for Program)
Core Programme
7 Status vis-a –vis other courses (give course Number/title 7.1 Overlap with any UG/PG
Course of the Dept./Centre PGDTDP – TDD104/Ornamentation Techniques-Textile Fabrics – 6 classes only,
TDD 203/ Design & Printing Technology Lab – 6 classes only
7.2 Overlap with any UG/PG Course of another Dept./Centre
DTD 107/Textile Ornamentation techniques I– 6 classes
8 Frequency of offering Thrice every Semester 9 Faculty who will teach the
Course
Dr. Parul Bhatnagar 10 Will the Course require
Visiting Faculty
Yes 11 Course Objectives (about 50
Words) indicating motivation and aims
An Entrepreneur development Programme is being offered according to NCVT & DEI syllabus for students to develop their skills in a vocational area, who come from below poverty line or backward areas.
After taking this Module they can immediately do job work for general public of their areas, and after gaining experience can setup their own small-scale industry.
Department of Drawing and Painting Modular Course
Screen Printing MTP301
1 Department /Center
Proposing the Course Drawing & Painting
2 Course Title INTRODUCTION AND PREPARATION OF DESIGNS
3 L-T-P L0 T0 P8
4 Credits 4
5 Course Number MTP301
6 Status(Category for Program)
Core Programme
7 Status vis-a –vis other courses (give course Number/title 7.1 Overlap with any UG/PG
Course of the Dept./Centre PGDTDP – TDD104/Ornamentation Techniques-Textile Fabrics – 6 classes only,
TDD 203/ Design & Printing Technology Lab – 6 classes only
7.2 Overlap with any UG/PG Course of another Dept./Centre
DTD 303/ Printing Technology Lab. – 6 classes
8 Frequency of offering Thrice every Semester 9 Faculty who will teach the
Course
Dr. Parul Bhatnagar 10 Will the Course require
Visiting Faculty
Yes 11 Course Objectives (about 50
Words) indicating motivation and aims
An Entrepreneur development Programme is being offered according to NCVT & DEI syllabus for students to develop their skills in a vocational area, who come from below poverty line or backward areas.
After taking this Module they can immediately do job work for general public of their areas, and after gaining experience can setup their own small-scale industry.
Department of Drawing and Painting Modular Course
Screen Printing MTP302
1 Department /Center
Proposing the Course Drawing & Painting
2 Course Title Making Screenss & Pre Printing Preprations
3 L-T-P L0 T0 P8
4 Credits 4
5 Course Number MTP302
6 Status
(Category for Program)
Core Programme
7 Status vis-a –vis other courses (give course Number/title 7.1 Overlap with any UG/PG
Course of the Dept./Centre PGDTDP – TDD104 – 6 classes only, TDD 203 – 6 classes
7.2 Overlap with any UG/PG Course of another Dept./Centre
PGDTDP – TDD104/Ornamentation Techniques -Textile Fabrics – 6 classes only,
TDD 203/ Design & Printing Technology Lab – 6 classes only
8 Frequency of offering Thrice every Semester 9 Faculty who will teach the
Course Guest Faculty
10 Will the Course require
Visiting Faculty Yes
11 Course Objectives (about 50 Words) indicating motivation and aims
An Entrepreneur development Programme is being offered according to NCVT & DEI syllabus for students to develop their skills in a vocational area, who come from below poverty line or backward areas.
After taking this Module they can immediately do job work for general public of their areas, and after gaining experience can setup their own small-scale industry.
Department of Drawing and Painting Modular Course
Screen Printing MTP303
1 Department /Center
Proposing the Course Drawing & Painting
2 Course Title PRINTING &VALUE ADDITIOMN
3 L-T-P L0 T0 P8
4 Credits 4
5 Course Number MTP303
6 Status
(Category for Program)
Core Programme
7 Status vis-a –vis other courses (give course Number/title 7.1 Overlap with any UG/PG
Course of the Dept./Centre PGDTDP – TDD104 – 6 classes only, TDD 203 – 12 classes only
7.2 Overlap with any UG/PG Course of another Dept./Centre
PGDTDP – TDD104/Ornamentation Techniques -Textile Fabrics – 6 classes, TDD 203/ Design & Printing Technology Lab – 6 classes
8 Frequency of offering Thrice every Semester 9 Faculty who will teach the
Course
Dr. Parul Bhatnagar 10 Will the Course require
Visiting Faculty
Yes 11 Course Objectives (about 50
Words) indicating motivation and aims
An Entrepreneur development Programme is being offered according to NCVT & DEI syllabus for students to develop their skills in a vocational area, who come from below poverty line or backward areas.
After taking this Module they can immediately do job work for general public of their areas, and after gaining experience can setup their own small-scale industry.
Department of Drawing and Painting Modular Course
Coral Draw (Graphic Design) MTP 401
1 Department /Center
Proposing the Course Drawing & Painting
2 Course Title Introduction to Graphics- CorelDraw
3 L-T-P L0 T0 P8
4 Credits 4
5 Course Number MTP 401
6 Status(Category for Program)
Core Programme
7 Status vis-a –vis other courses (give course Number/title 7.1 Overlap with any UG/PG
Course of the Dept./Centre PGDTDP TDD 203/ Design & Printing Technology Lab – 6 classes only
7.2 Overlap with any UG/PG Course of another Dept./Centre
8 Frequency of offering Thrice every Semester 9 Faculty who will teach the
Course Guest Faculty
10 Will the Course require
Visiting Faculty Yes
11 Course Objectives (about 50 Words) indicating motivation and aims
An Entrepreneur development Programme is being offered according to NCVT & DEI syllabus for students to develop their skills in a vocational area, who come from below poverty line or backward areas.
After taking this Module they can immediately do job work for general public of their areas, and after gaining experience can setup their own small-scale industry.
Department of Drawing and Painting Modular Course
Coral Draw (Graphic Design) MTP402
1 Department /Center
Proposing the Course Drawing & Painting 2 Course Title Working with Tools
3 L-T-P L0 T0 P8
4 Credits 4
5 Course Number MTP 402
6 Status(Category for Program)
Core Programme
7 Status vis-a –vis other courses (give course Number/title 7.1 Overlap with any UG/PG
Course of the Dept./Centre PGDTDP TDD 203/ Design & Printing Technology Lab – 6 classes only
7.2 Overlap with any UG/PG Course of another Dept./Centre
8 Frequency of offering Thrice every Semester 9 Faculty who will teach the
Course Guest Faculty
10 Will the Course require
Visiting Faculty Yes
11 Course Objectives (about 50 Words) indicating motivation and aims
An Entrepreneur development Programme is being offered according to NCVT & DEI syllabus for students to develop their skills in a vocational area, who come from below poverty line or backward areas.
After taking this Module they can immediately do job work for general public of their areas, and after gaining experience can setup their own small-scale industry.
Department of Drawing and Painting Modular Course
Coral Draw (Graphic Design) MTP403
1 Department /Center
Proposing the Course Drawing & Painting
2 Course Title Creating Designs
3 L-T-P L0 T0 P8
4 Credits 4
5 Course Number MTP 403
6 Status(Category for Program)
Core Programme
7 Status vis-a –vis other courses (give course Number/title 7.1 Overlap with any UG/PG
Course of the Dept./Centre PGDTDP TDD 203/ Design & Printing Technology Lab – 6 classes only
7.2 Overlap with any UG/PG Course of another Dept./Centre
8 Frequency of offering Thrice every Semester 9 Faculty who will teach the
Course Dr. Parul Bhatnagar
10 Will the Course require
Visiting Faculty Yes
11 Course Objectives (about 50 Words) indicating motivation and aims
An Entrepreneur development Programme is being offered according to NCVT & DEI syllabus for students to develop their skills in a vocational area, who come from below poverty line or backward areas.
After taking this Module they can immediately do job work for general public of their areas, and after gaining experience can setup their own small-scale industry.
