PreDCR/ AutoDCR FAQ’s - 1.0v

(1)

PreDCR/ AutoDCR FAQ’s - 1.0v

(2)

PreDCR/AutoDCR FAQ’s 1.0v Page 2 TABLE OF CONTENTS

Q1. What system settings are required for installation of PreDCR / AutoDCR? ... 3

Q2. How to ‘Mark Margin’ in PreDCR drawing? ... 17

Q.3. How to mark green strip in PreDCR drawing? ... 19

Q.4. How to write main road text in PreDCR drawing ? ... 22

Q.5. How to draw section line in site plan in PreDCR drawing? ... 23

Q.6. How to mark drawing reference points in PreCR drawing? ... 26

Q.7. How to mark mortgage area for total BUA in PreDCR drawing?... 28

Q.8. How to mark ‘Room’ entity in PreDCR drawing? ... 30

Q.9.. How to Insert ‘Ventilation’ entity in PreDCR drawing? ... 34

Q.10. How To Select Road Widening Concession ? ... 36

Caseno. 1:-To Select road widening concession as “Grant of TDR” ... 36

Case no. 2:-To Select road widening concession as “RW Setback Concession” ... 38

Case no. 3:-To Select road widening concession as “Additional Floors” ... 39

Case no. 4:-To Select road widening concession as “All (includes Grant of TDR, RW Setback Concession and Additional Floor)” ... 40

Q.11. How To Mark Special_Use_BUA ? ... 41

Case no. 1:- To mark BUA for special use building e.g. Proposed church building ... 41

Q.12. How To Mark ‘Ramp” in PreDCR drawing ? ... 45

Q.13. How To Mark ‘Ventilation Shaft’ in PreDCR drawing ? ... 49

Q.14. How To Mark ‘Splay’ in PreDCR drawing ? ... 52

Q.15. How To Mark ‘BUA Outline’ in PreDCR drawing ? ... 55

Q.16. How To Mark ‘Balcony’ in PreDCR drawing ?... 58

Q.17. How To Mark ‘Parking’ in PreDCR drawing ? ... 60

Q.18. How To Mark ‘Existing Structure’ in PreDCR drawing ? ... 64

General instructions: ... 67

(3)

PreDCR/AutoDCR FAQ’s 1.0v Page 3 Q1. What system settings are required for installation of PreDCR / AutoDCR?

Point A) Give full rights to C drive.

Step 1:- Go to control panel.

Step 2:- Click on user accounts.

(4)

PreDCR/AutoDCR FAQ’s 1.0v Page 4 Step 3:- Click on ‘Change user account control settings’.

Step 4:- Now move the cursor to never notify.

(5)

PreDCR/AutoDCR FAQ’s 1.0v Page 5 Step 5:- Restart the machine.

Step 6:- Open start menu, then type “Regedit” and hit enter as shown in below screenshot.

(6)

PreDCR/AutoDCR FAQ’s 1.0v Page 6 Step 7:- Follow the path:

HKEY_LOCAL_MACHINESOFTWAREMICROSOFTWINDOWSCURRENT VERSIONPOLICYSYSTEM.

(7)

PreDCR/AutoDCR FAQ’s 1.0v Page 7

(8)

(9)

PreDCR/AutoDCR FAQ’s 1.0v Page 9 Step 8:- Change the EnableLUA value to 0.

Step 9:- Restart the machine.

Point B) To check the error in application Step 1:- Go to control panel.

(10)

PreDCR/AutoDCR FAQ’s 1.0v Page 10 Step 2:- Click on system security.

Step 3:- Click on Administrative tools.

(11)

PreDCR/AutoDCR FAQ’s 1.0v Page 11 Step 4:- Click on Event viewer.

Step 5:- Click on Window log.

(12)

PreDCR/AutoDCR FAQ’s 1.0v Page 12 Step 6:- Click on application to check the application related errors and click on system to check the system related errors.

Point C) To check the HASP drivers for autodcr and predcr Step 1:- Open start menu, then type “Run”.

(13)

PreDCR/AutoDCR FAQ’s 1.0v Page 13 Step 2:- Open start menu, then type “Regedit” and hit enter as shown in below screenshot.

Step 3:- Follow the path.

HKEY_LOCAL MACHINESOFTWAREWOW6432 NODECOSERVER

(14)

(15)

PreDCR/AutoDCR FAQ’s 1.0v Page 15 Step 4:- In Coserver, check CoActivator and CoPDCRActivator folder.

(16)

PreDCR/AutoDCR FAQ’s 1.0v Page 16 Step 5: Also check corresponding AutoDCR and PreDCR folder in SEPL.

(17)

PreDCR/AutoDCR FAQ’s 1.0v Page 17 Q2. How to ‘mark margin’ in PreDCR drawing?

Step 1:- Click on second tab ‘mark margin’ command of PreDCR Toolbar.

Step 2:- Select ‘Yes’ button.

(18)

PreDCR/AutoDCR FAQ’s 1.0v Page 18 Step 3:- ‘Click corresponding button to mark the margins’ select rear, side 1 and side 2 margins in drawing.

Step 4:- Click ‘Ok’.

(19)

PreDCR/AutoDCR FAQ’s 1.0v Page 19 Q.3. How to mark green strip in PREDCR drawing?

Step 1:- Select ‘OrganizedOpenSpace’ layer in l ayer dropdown.

Step 2:- Draw Green strip closed poly line in the drawing.

(20)

PreDCR/AutoDCR FAQ’s 1.0v Page 20 Step 3:- To mark Green Strip follow the path.

Mark  Organized Open Space  Green Strip

(21)

PreDCR/AutoDCR FAQ’s 1.0v Page 21 Step 4:- Select ‘OrganizedOpenSpace’ polylines and press “ENTER”.

(22)

PreDCR/AutoDCR FAQ’s 1.0v Page 22 Q.4. How to write main road text in PreDCR drawing?

Step 1:- Select ‘Main road’ layer, write text using MText command.

For example: - 9.14 M Wide Proposed Road 10.06 M Wide Existing Road

(23)

PreDCR/AutoDCR FAQ’s 1.0v Page 23 Q.5. How to draw section line in PreDCR drawing?

Step 1:- Select ‘SectionLine’ layer in layer dropdown.

(24)

PreDCR/AutoDCR FAQ’s 1.0v Page 24 Step 2:- Draw 'Section Line’ using “PL (PLINE)” command.

(25)

PreDCR/AutoDCR FAQ’s 1.0v Page 25 Step 3:- Write text “Section Line” using “MT (MTEXT)” command.

(26)

PreDCR/AutoDCR FAQ’s 1.0v Page 26 Q.6. How to mark drawing reference points in PreDCR drawing?

Step 1:- To mark direction reference circle select as follows from PreDCR dropdown PreDCR  Insert  Direction Ref Circles

Step2:- Insert the direction reference circles inside the proposed work in the plot.

(27)

PreDCR/AutoDCR FAQ’s 1.0v Page 27 Step 3:- Copy the direction reference circles by selecting a common point from inserted site plan and place it in the required floor plans.

Step 5:- After copying the direction reference circles in all plans (including Terrace floor plan) then PreDCR verification can be done.

(28)

PreDCR/AutoDCR FAQ’s 1.0v Page 28 Q.7. How to mark mortgage area for total BUA in PreDCR drawing?

Step 1:- Draw mortgage area polyline as per required area on any one of the proposed floors.

(29)

PreDCR/AutoDCR FAQ’s 1.0v Page 29 Step 2:- Mark the mortgage area polyline from PreDCR dropdown as follows:

MarkMortgage area  Built Up Area to Mortgage.

(30)

PreDCR/AutoDCR FAQ’s 1.0v Page 30 Q.8. How to mark ‘Room’ entity in PreDCR drawing?

Step 1:- Select ‘Room’ layer in layer dropdown.

(31)

PreDCR/AutoDCR FAQ’s 1.0v Page 31 Step 2:- Draw ‘Room’ in closed poly line in the drawing.

(32)

PreDCR/AutoDCR FAQ’s 1.0v Page 32 Step 3:- Assign name to the ‘Room’ polyline from PreDCR dropdown toolbar as follows:

Assign NameRoom .

Step 4:- Select required room name for the drawing.

(33)

PreDCR/AutoDCR FAQ’s 1.0v Page 33 Step 5:- Select ‘Room’ polyline to assign the name.

(34)

PreDCR/AutoDCR FAQ’s 1.0v Page 34 Q.9. How to Insert ‘Ventilation’ entity in PreDCR drawing?

Step 1:- To insert ‘Ventilation’ follow the path:

Insert Window.

(35)

PreDCR/AutoDCR FAQ’s 1.0v Page 35 Step 2:- Name the ventilation as “V”, enter the values required in ‘Window information Dialog’

box. (Same process to mark ‘Door’ in PreDCR drawing)

(36)

PreDCR/AutoDCR FAQ’s 1.0v Page 36 Q.10. How to Select road widening concession?

Case no.1: To select road widening concession as ‘Grant of TDR’.

Step 1:- Click on ‘Road widening concession’ dropdown in DCR project dialog box.

Step2:- Select ‘Grant of TDR’ option.

(37)

PreDCR/AutoDCR FAQ’s 1.0v Page 37 Step3:-Enter “TDR Area” and click on ‘OK’ button.

(38)

PreDCR/AutoDCR FAQ’s 1.0v Page 38 Case no. 2: To select road widening concession as ‘RW Setback Concession’

Step 1:- Click on ‘Road Widening Concession’ dropdown in DCR project dialog box .

Step 2:- Select “RW setback concession” and Click on ‘OK’ button.

(39)

PreDCR/AutoDCR FAQ’s 1.0v Page 39 Case no.3: To select road widening concession as ‘Additional Floors’

Step 1:- Click on ‘Road Widening Concession’ dropdown in DCR Project dialog box .

Step 2:- Select ‘Additional floors’ option, enter road widening floor no. and click on ‘OK’ button.

(40)

PreDCR/AutoDCR FAQ’s 1.0v Page 40 Case no. 4: To select road widening concession as ‘All (includes Grant of TDR, RW Setback Concession and Additional Floor)’

Step 1:- Click on “Road Widening Concession” dropdown in DCR Project dialog box .

Step 2:- Select “ALL” option, Enter ‘Road widening Floor No & TDR Area’ and click on ‘OK’

button.

(41)

PreDCR/AutoDCR FAQ’s 1.0v Page 41 Q.11. How to mark Special_Use_BUA ?

Case no.1: To mark BUA for special use building e.g. proposed church building Step 1:- Select Plot Use ‘ Assembly’.

Step 2:- Select, plot sub use , Religious (since propsed building is a church).

(42)

Step 3:- Select land use zone according to the land details. (in this case it is NA), click ‘OK’.

Step 4:- The specific layer for Assembly—religious—building will therefore be created in PreDCR.

(43)

PreDCR/AutoDCR FAQ’s 1.0v Page 43 Step 5:-Draw BUA polyline for structure under layer SpecialUse_BUA in the proposed building Plan.

Step 6:-Then Mark Special use BUA polyline, under PreDCR drop down toolbar, Mark ---> SpecialUse FAR Markings ---> Assembly.

(44)

PreDCR/AutoDCR FAQ’s 1.0v Page 44 Step 7:- Select ‘SpecialUseBUAOutline Polylines’ & press ‘Enter’.

(45)

PreDCR/AutoDCR FAQ’s 1.0v Page 45 Q.12 How to mark ‘Ramp’ in PreDCR drawing?

Step 1:- Select ‘Ramp’ layer in layer dropdown.

(46)

PreDCR/AutoDCR FAQ’s 1.0v Page 46 Step 2:-Draw ramp using polyline.

Step 3:-To assign name for Ramp follow the path, under PreDCR drop down as follows:

Assign Name ---> Ramp Name

(47)

PreDCR/AutoDCR FAQ’s 1.0v Page 47 Step 4:-Select ‘Ramp Polyline’for assigning ‘Ramp Name’.

Step 5:-Enter the ramp’s dimensions in ‘Assign Name dialog’ box and click ‘OK’.

(48)

PreDCR/AutoDCR FAQ’s 1.0v Page 48 Step 6:-In case of other ramps to mark ,select ‘OK’ or select ‘No’(Incase of no more ramp to mark).

(49)

PreDCR/AutoDCR FAQ’s 1.0v Page 49 Q.13. How to mark ‘Ventilation shaft’ in PreDCR drawing?

Step 1:- Select ‘Ventilation shaft’ layer in layer dropdown.

(50)

PreDCR/AutoDCR FAQ’s 1.0v Page 50 Step 2:- Draw ventilation shaft using closed polyline command.

(51)

PreDCR/AutoDCR FAQ’s 1.0v Page 51 Step 3:- Text the ventilation shaft using Mtext (MT) command.

(52)

PreDCR/AutoDCR FAQ’s 1.0v Page 52 Q.14. How to mark ‘Splay’ in PreDCR drawing?

Step 1:- Select ‘Splay’ layer in layer dropdown.

Step 2:- Draw ‘Splay’ using polyline command.

(53)

PreDCR/AutoDCR FAQ’s 1.0v Page 53 Step 3:- Text the Splay using Mtext (MT) command.

(54)

(55)

PreDCR/AutoDCR FAQ’s 1.0v Page 55 Q.15. How To Mark “BUAOutline” in PreDCR drawing ?

Step 1:- Select following layer according to the building type to draw BUA Outline in layer dropdown:

‘ResiBUAOutline’--> for residential building

‘CommBUAOutline’ -->for commercial building

‘IndBUAOutline’ --> for Industrial building

‘SpecialUseBUAOutline’ --> For other than residential, commercial and industrial buildings i:e educational buildings, religious buildings .

(56)

PreDCR/AutoDCR FAQ’s 1.0v Page 56 Step 2:- Draw ‘BUA outline’ using closed polyline command.

Step 3:-To mark “BUAOutline”, follow the path in PreDCR dropdown.

Mark ---> BUAOutline--->ExistingBUAOutline/To Be Demolished/Undo Marking(default)

(57)

PreDCR/AutoDCR FAQ’s 1.0v Page 57 Step 4:-Select “BUAOuline” polyline in the floor palns and press “Enter”.(Only for floor plans)

(58)

PreDCR/AutoDCR FAQ’s 1.0v Page 58 Q.16. How to mark ‘Balcony’ in PreDCR drawing?

Step 1:- Select ‘Balcony’ layer in layer dropdown.

Step 2:- Draw ‘Balcony’ using closed polyline command.

(59)

PreDCR/AutoDCR FAQ’s 1.0v Page 59 Step 3:-To mark ‘Balcony’, follow the path in PreDCR dropdown:

Mark ---> Balcony ---> Undo Mark(Default)

Step 4:- Select ‘Balcony’ polyline and press ‘Enter’.

(60)

PreDCR/AutoDCR FAQ’s 1.0v Page 60 Q.17. How to mark ‘Parking’ in PreDCR drawing?

Step 1:- Select ‘Parking’ layer in layer dropdown.

(61)

PreDCR/AutoDCR FAQ’s 1.0v Page 61 Step 2:- To insert ‘Parking’ follow the path in PreDCR dropdown.

Insert--->Parking--->Car/Physically handiacapped car/ scooter/Cycle/Transport vehicle/Bus parking/Ambulance.

(62)

PreDCR/AutoDCR FAQ’s 1.0v Page 62 Step 3:-Select either one , floor or plot polyline.

Step 4:- Specify insertion point for parking.

(63)

PreDCR/AutoDCR FAQ’s 1.0v Page 63 Step 5:- Specify number for parking.

(64)

PreDCR/AutoDCR FAQ’s 1.0v Page 64 Q.18. How to mark “Existing Structure” in PreDCR drawing?

Step 1:- Select ‘Existing Structure’ layer in layer dropdown.

Step 2:- Draw ‘Existing Structure’ using closed Polyline command in site plan.

(65)

PreDCR/AutoDCR FAQ’s 1.0v Page 65 Step 3:- To mark ‘Existing Structure’ follow the path as follows in PreDCR dropdown:

Mark ---> Existing Structure ---> To be demolished/To be retained.

(66)

PreDCR/AutoDCR FAQ’s 1.0v Page 66 Step 4:-Select ‘Existing Structure’ polyline.

(67)

PreDCR/AutoDCR FAQ’s 1.0v Page 67 General instructions:

1) Check parameters - land use, sub landuse while running the drawing

2) Check layer properties - line colour, line weight, and line type must be in ‘By layer’.

PreDCR layers must not contain any line entity.

3) Plot layer: Avoid more than one entity in plot layer.

Assign text in the same layer as that of entity by using ‘Mtext’ command

4) Road widening: Text of road widening should not be edited once the marking is done.

5) Accessory uses: Septic tank must be minimum 1m away from plot boundary in front setback.

6) Net plot: Net plot should not be drawn manually. It would automatically be created while marking margin.

7) Print additional details: Must give text for each entity by using Mtext command.

Extract of master plan must be in Autocad drawing. Image format will not be accepted to create PDF.

8) Section should not be marked in Print additional detail layer.

9) Elevations, location plan, extract of master plan are the entities to be marked in this layer.

10) Margin: The front side margin will automatically be taken by PreDCR. Select the side 1 or side 2 or rear margin.

11) All poly line entities should be closed

12) Site Plan contains plot ploy line, (net area ploy line and margin line are generated by program), proposed work (building line), road (existing /road widening), green strip, RWHS, Amenities/sub structure.

★★★